Skip to the content
2 layers59.7 × 54 mmEsp32-gps proj, the printed circuit board in 3D

ESP32-based navigation system on a custom KiCad PCB built for a minimized form factor.

Size
59.7 × 54 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
32
Pads
56
Tracks, vias
85, 14
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Sep 2026
Updated
4 Sep 2026

Overview

Esp32-gps proj is an open-source printed circuit board by CowMan999, from the CowMan999/esp-offline-map repository on GitHub. It is a 2-layer board of 59.7 × 54 mm with 7 parts on 32 nets, routed with 85 tracks and 14 vias.

It belongs with the radio and wireless boards and the ESP32 boards of this library.

README

README.md

ESP32 Memory-Optimized Mapping System & Custom PCB

Offline turn-by-turn map display built on a custom KiCad PCB. An ESP32 drives a TFT LCD over SPI, reads position from a Neo-M8 GPS module over UART, and renders map tiles streamed from an SD card - all inside SRAM tight enough to require custom memory handling.

Overview

This project pairs original PCB hardware with custom C++ firmware:

  • Hardware: A KiCad-designed PCB integrating an ESP32, Neo-M8 GPS (UART), and TFT LCD (SPI), with trace routing optimized for noise immunity in a minimized form factor.
  • Firmware: An LVGL 9-based UI (lock screen, menu, settings, map, and run tracking) with a custom tile renderer that decodes PNG map tiles from SD storage and blits them directly to the display, maintaining a 5Hz update rate with roughly 2-meter geospatial accuracy.

Features

  • Offline OpenStreetMap tile rendering (zoom level 16) with on-the-fly Web Mercator projection
  • Interrupt-driven GPS parsing (TinyGPS++) for real-time position updates
  • Touch-based map panning with live camera tracking
  • SD card tile storage with graceful checkerboard fallback for missing tiles
  • LVGL 9 UI: lock screen, main menu, brightness control, map view, and run history
  • PWM-controlled backlight (ESP32 core 3.x ledcAttach/ledcWrite)
Lock ScreenMain MenuMap View
Lock screenMain menuMap view

Hardware

ComponentInterfaceNotes
ESP32-Main MCU
TFT LCD (320x240)SPIDisplay + resistive touch
Neo-M8 GPSUART9600 baud, pins 16/17
microSD cardSPI (HSPI)Stores /map/<zoom>/<x>/<y>.png tiles
SchematicPCB Layout
SchematicPCB layout

Schematic and board files are in /hardware (KiCad).

Firmware Dependencies

lv_conf.h requires: LV_COLOR_DEPTH 16, LV_USE_CANVAS 1, LV_USE_SLIDER 1, and the Montserrat 10/14/20 fonts enabled.

Getting Started

  1. Flash the PCB with this firmware via the Arduino IDE or PlatformIO (ESP32 core >= 3.0).
  2. Format a microSD card as FAT32 and populate /map/<zoom>/<x>/<y>.png with pre-rendered OpenStreetMap tiles.
  3. Insert the SD card and power on — the device boots to a lock screen, then the main menu (Settings / Map / Runs).

Project Status

Actively developed. Planned work includes route recording under the Runs screen and expanded tile caching.

Parts

7
QtyValueFootprintReferences
2Conn_01x15_SocketConnector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_VerticalESP-BOT1, ESP-TOP1
1Conn_01x04_SocketConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalNEO_M1
1Conn_01x08_SocketConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalTF_READER1
1Conn_01x12_SocketConnector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_VerticalTFT_LCD1

The 5 most common of 7 parts.

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Esp32-gps proj PCB?

It measures 59.7 × 54 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp32-gps proj use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32-gps proj KiCad files?

From the CowMan999/esp-offline-map repository on GitHub, at the commit this page was made from: the board is pcb/esp32-gps-proj.kicad_pcb and its schematic pcb/esp32-gps-proj.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32-gps proj design in my own project?

Its repository states no licence, so its author keeps all rights: ask CowMan999 before reusing the design.