
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

This is the repo for the Core Electronics USB-C LiPo Charger.
CE Makerverse USB C LiPo Charger is an open-source printed circuit board by CoreElectronics, from the CoreElectronics/CE-Makerverse-USB-C-LiPo-Charger repository on GitHub. It is a 2-layer board of 21 × 34.5 mm with 33 parts on 18 nets, routed with 111 tracks and 16 vias.
Its parts include 7 resistors, 3 capacitors, 3 connectors, 2 ICs and 2 diodes. It belongs with the power boards of this library.
This is the repo for the Core Electronics USB-C LiPo Charger.
The PCB layout project requires KiCAD 6.0 or newer to view. The schematic is provided in PDF format in the Documents folder.
This project is open source - please review the LICENSE.md file for further licensing information.
If you have any technical questions, or concerns about licensing, please contact technical support on the Core Electronics forums.
"PiicoDev" and the PiicoDev logo are trademarks of Core Electronics Pty Ltd.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C17 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R6 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 20k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 3V3 Reg - SOT23 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | 3k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | CE08374 | lib:CE08374 | G1 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D2 |
| 1 | G*** | kibuzzard-6216C913 | kibuzzard-6216C913 |
| 1 | G*** | kibuzzard-6216C8F6 | kibuzzard-6216C8F6 |
| 1 | G*** | kibuzzard-6216CB03 | kibuzzard-6216CB03 |
| 1 | G*** | kibuzzard-6216CAF0 | kibuzzard-6216CAF0 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LOGO_Makerverse | CoreElectronics_Artwork:makerverse_logo_short_14.0x2.4mm | G2 |
| 1 | Logo_Open_Hardware_Small | CoreElectronics_Artwork:oshw_3.9x3.5mm | LOGO1 |
| 1 | MCP73832-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SW_DIP_x02 | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_Copal_CHS-02A_W5.08mm_P1.27mm_JPin | SW1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository

It measures 21 × 34.5 mm and has 2 copper layers, 1.6 mm thick.
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CoreElectronics/CE-Makerverse-USB-C-LiPo-Charger repository on GitHub, at the commit this page was made from: the board is PCB/PCB.kicad_pcb and its schematic PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CoreElectronics before reusing the design.