
Proto gshps flex bodge board
CoolNamesAllTaken/geeps-hardware
Pronounced Gee-Pee-Ess (hardware).

Pronounced Gee-Pee-Ess (hardware).
Gshps is an open-source printed circuit board by CoolNamesAllTaken, from the CoolNamesAllTaken/geeps-hardware repository on GitHub. It is a 4-layer board of 90 × 55 mm with 111 parts on 108 nets, routed with 940 tracks and 268 vias.
It is built around the RP2040, W25Q128JVSIQ and DM3AT-SF-PEJM5, with the AP2112K-3.3TRG1, TP4056 and TL3342F160QG/TR among its other parts. Its parts include 35 capacitors, 32 resistors, 9 transistors, 8 diodes and 6 connectors. It belongs with the RP2040 boards of this library.
Pronounced Gee-Pee-Ess (hardware).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C21, C24, C34, C35 |
| 14 | 10k | Resistor_SMD:R_0402_1005Metric | R7, R8, R14, R15, R17, R19, R23, R25, R26, R27, R28, R29, R31, R32 |
| 7 | 1uF 25V | Capacitor_SMD:C_0603_1608Metric | C26, C27, C28, C29, C30, C31, C33 |
| 6 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2, SW3, SW4, SW5, SW6 |
| 5 | 1uF | Capacitor_SMD:C_0603_1608Metric | C15, C16, C19, C20, C25 |
| 5 | 20V 4.2A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q5, Q6, Q9 |
| 5 | 5.1k 1% | Resistor_SMD:R_0402_1005Metric | R1, R3, R6, R12, R22 |
| 4 | 30V 2.2A | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q7, Q8 |
| 4 | 40V 2A | Diode_SMD:D_SOD-123F | D3, D6, D7, D8 |
| 4 | MountingHole | Custom_MountingHole:MountingHole_2.7mm_M2.5_Isolated | H1, H2, H3, H4 |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R9, R10, R16 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C18 |
| 2 | 0.47R 1% 1W | Resistor_SMD:R_2512_6332Metric | R2, R30 |
| 2 | 115R | Resistor_SMD:R_0402_1005Metric | R5, R21 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R18, R20 |
| 2 | 27.4R 1% | Resistor_SMD:R_0402_1005Metric | R11, R13 |
| 2 | 27pF NP0 | Capacitor_SMD:C_0402_1005Metric | C22, C23 |
| 2 | GREEN | LED_SMD:LED_0603_1608Metric | D2, D5 |
| 1 | 10k 1% | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 10uH 0.8A | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 12.000MHz 18pF | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123 | D4 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 287R | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 4.7uF 25V | Capacitor_SMD:C_0805_2012Metric | C32 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Conn_01x03_Pin | Connector_Molex:Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_Horizontal | J3 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J4 |
| 1 | DM3AT-SF | Connector_Card:microSD_HC_Hirose_DM3D-SF | J6 |
| 1 | DRTR5V0U2SR-7 | Package_TO_SOT_SMD:SOT-143 | CR1 |
| 1 | E2213PS0E | Custom_FFC-FPC:Hirose_FH34SRJ-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal_Mirrored | J5 |
| 1 | Graphic | Custom_Graphic:BirdWithPants_Small_Left | GRAPHIC2 |
| 1 | Graphic | Custom_Graphic:BirdWithPants_Small_Right | GRAPHIC1 |
| 1 | JST-PH 01x02 Male | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | PA1616S | Custom_Module:PA1616S | U5 |
| 1 | PCB | Custom_Graphic:PCB_PN_REV | PCB1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U4 |
| 1 | TP4056 | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Custom_Connector_USB:USB_C_Receptacle_GCT_USB4115-03-C | J2 |
| 1 | W25Q128JVS | Custom_Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |

CoolNamesAllTaken/geeps-hardware
Pronounced Gee-Pee-Ess (hardware).

CoolNamesAllTaken/vibamix
An interactive ePaper nametage for playing "will it blend" with arbitrary groups of people.


iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

newaetech/sonata-pcb
Design files and associated documentation for Sonata PCB, part of the Sunburst Project

jericho-adler/volvo-polestar-passthrough-harness-box
A small automotive ADAS harness pass-through box designed in KiCad, built for Volvo/Polestar vehicles. It sits inline on the camera/VCU harness and provides a fail-safe electrical bypass plus signal switching, protected…


khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries

nealpalmer/UsbJoy
USB Joystick Controller 12Digital/SmartButton, 4Analog, 1Rotary, 1NeoPixel
It measures 90 × 55 mm and has 4 copper layers, 0.71 mm thick.
111 parts, built around the RP2040, W25Q128JVSIQ, DM3AT-SF-PEJM5 and AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CoolNamesAllTaken/geeps-hardware repository on GitHub, at the commit this page was made from: the board is kicad/gshps/gshps.kicad_pcb and its schematic kicad/geeps_proto/geeps_proto.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CoolNamesAllTaken before reusing the design.