
Sweepv2
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.

The raspberry pi pico breakout board enables you to use the raspberry pico without having to use a breadboard. The pin headers give you access to the raspberry pi pico pins which can facilitate debugging , making…
Pico expansion long board is an open-source printed circuit board by Chromico, from the Chromico/Raspberry-Pi-Pico-Breakout-Board repository on GitHub, published under the MIT licence. It is a 2-layer board of 67.5 × 49 mm with 53 parts on 41 nets, routed with 84 tracks and 0 vias.
Its parts include 2 connectors, 1 IC and 1 switch. It belongs with the RP2040 boards of this library.
The raspberry pi pico breakout board enables you to use the raspberry pico without having to use a breadboard. The pin headers give you access to the raspberry pi pico pins which can facilitate debugging , making connections using dupont cables and making more permanent connections while keeping the pico board intact. There is also a reset switch that you can use to reset the raspberry pi pico.
My website: https://tecknologg.website
Blog post: coming soon

You can get the official documentation here: https://github.com/Chromico/Raspberry-Pi-Pico-Breakout-Board/blob/main/documentation/Raspberry%20Pi%20Pico%20Breakout%20Board%20Documentation.pdf
Pending
Need to contact me ? Just send me an email at nathan@tecknologg.website or tecknologg@gmail.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | buzzard_labels | , , , , , , , , , , , , , , , +28 | |
| 2 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J1, J2 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
The 48 most common of 53 parts.

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI


polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7


Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system

nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT
It measures 67.5 × 49 mm and has 2 copper layers, 1.6 mm thick.
53 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Chromico/Raspberry-Pi-Pico-Breakout-Board repository on GitHub, at the commit this page was made from: the board is hardware/pico-expansion-long-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).