Skip to the content
2 layers99.8 × 99.8 mmArduSynth, the printed circuit board in 3D

HW/SW for a low-cost Arduino-based audio synthesizer (based upon Mozzi Library)

Size
99.8 × 99.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
43
Nets
55
Pads
182
Tracks, vias
326, 3
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
24 Sep 2021
Updated
25 Feb 2024

Overview

ArduSynth is an open-source printed circuit board by ChrisVeigl, from the ChrisVeigl/ArduSynth repository on GitHub. It is a 2-layer board of 99.8 × 99.8 mm with 43 parts on 55 nets, routed with 326 tracks and 3 vias.

Its parts include 16 connectors, 6 resistors, 4 switches, 3 diodes and 1 capacitor. It belongs with the audio and music boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.

README

README.md

ArduSynth

HW/SW for low-cost Arduino-based audio synthesizers, using the Mozzi Library. Currently, two designs are available: one for the Arduino Nano and one for the TeensyLC microcontroller. The TeensyLC version is recommended and will be updated in the future - it offers more features like Midi control via the Teensy's usbMidi functions. The KICad projects (Schematics, PCB) are available in the respective HW folders, partnumbers @ digikey / Aliexpress are provided.

About the demo Synth Sketches

Synthesizer sketches can be added / modified on demand. Currently there are two demo synth designs available, based upon:

SW-Build instructions and Dependencies

For the TeensyLC version, follwing alternative/additional libraries are used:

  • currently this branch of the Mozzi library is needed for TeensyLC support: https://github.com/tomcombriat/Mozzi/tree/Teensy4X
  • the Adafruit library for the SSD1306 OLed-Display is used: https://github.com/adafruit/Adafruit_SSD1306 Please note that a modified version of this library is delivered in the src folder - the display method was adapted in order to call audioHook() - which prevents distorted audio during display updates.
  • furthermore, the Adafruit GFX library https://github.com/adafruit/Adafruit-GFX-Library and the Adafruit BUI-IO library https://github.com/adafruit/Adafruit_BusIO are needed - they can be installed from the Arduinos Library manager.
  • in order to use the correct I2C interface of the TeensyLC, the Wire1 interface must be enabled either by adding "-DWIRE_IMPLEMENT_WIRE1" to the teensyLC.build.flags.defs in the file Arduino\hardware\teensy\avr\boards.txt file or by uncommenting line 43 in file Arduino\hardware\teensy\avr\libraries\Wire\WireKinetis.h

Parts

43
QtyValueFootprintReferences
11Conn_01x03_MaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2, J3, J4, J5, J6, J7, J8, J9, J10, J16, J17
9100Ktest:Potentiometer_Alps_RK09K_Single_Vertical_modifiedRV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9
4SW_PushButtons_Switches_THT:SW_PUSH-12mm_Wuerth-430476085716SW1, SW2, SW3, SW4
3470Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR1, R2, R3
3LEDLEDs:LED_D5.0mmD1, D2, D3
3MountingHoleMountingHole:MountingHole_3.2mm_M3_PadH1, H2, H3
24.7KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR5, R6
2Conn_01x02_MaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ12, J13
13.9KResistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR4
14.7nCapacitors_THT:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02C1
1AudioJack3_GroundTeensySynth_Footprints:FC68125J1
1Screw_Terminal_01x03TerminalBlock:TerminalBlock_bornier-3_P5.08mmJ11
1Teensy-LCTeensySynth_Footprints:Teensy_LCU1
1display_connector_91601-304LFTeensySynth_Footprints:91601304LFJ15

More from ChrisVeigl/ArduSynth

1
  • 2 layers100.3 × 100.3 mmArduSynth, the printed circuit board in 3D

    ArduSynth

    ChrisVeigl/ArduSynth

    HW/SW for a low-cost Arduino-based audio synthesizer (based upon Mozzi Library)

    39 parts7

Similar boards

  • 2 layers52.2 × 52.2 mmBase, the printed circuit board in 3D

    Base

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    43 parts3kApache-2.0
  • 2 layers33 × 34 mmESP32-bat monitor latch, the printed circuit board in 3D

    ESP32-bat monitor latch

    pcbreflux/espressif

    all espressif stuff will committed here

    43 parts608GPL-3.0
  • 2 layers42.9 × 19 mmPoly kb 2.25U, the printed circuit board in 3D

    Poly kb 2.25U

    thpoll83/PolyKybd

    PolyKybd

    43 parts411CERN-OHL-W-2.0
  • 2 layers99.1 × 99.7 mmRC6502 Prototyping, the printed circuit board in 3D

    RC6502 Prototyping

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    43 parts193GPL-3.0
  • 2 layers26.6 × 38.7 mmMdb slave esp32s3-mini, the printed circuit board in 3D

    Mdb slave esp32s3-mini

    nodestark/mdb-esp32-cashless

    ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

    43 parts190MIT
  • 2 layers97.3 × 71 mmZynScreen v1, the printed circuit board in 3D

    ZynScreen v1

    zynthian/zynthian-hw

    Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

    43 parts156

Questions

How big is the ArduSynth PCB?

It measures 99.8 × 99.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ArduSynth use?

43 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ArduSynth KiCad files?

From the ChrisVeigl/ArduSynth repository on GitHub, at the commit this page was made from: the board is TeensyLC/HW/PCB_TeensyLC/arduSynth.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ArduSynth design in my own project?

Its repository states no licence, so its author keeps all rights: ask ChrisVeigl before reusing the design.