
XBox button board no LAN HDD all tracks front
ChrisGPlugs/OGXBOX_Front_Buttons
Original Xbox Front panel Circuit board recreated in KiCad - Additional locations for HDD and LAN LEDs added

Original Xbox Front panel Circuit board recreated in KiCad - Additional locations for HDD and LAN LEDs added
XBox button board is an open-source printed circuit board by ChrisGPlugs, from the ChrisGPlugs/OGXBOX_Front_Buttons repository on GitHub. It is a 2-layer board of 80 × 40.6 mm with 16 parts on 13 nets, routed with 79 tracks and 0 vias.
Its parts include 2 resistors, 2 diodes and 2 connectors.
Orginal Xbox Front button board. Recreated in KiCad based off the Board design of the Gerbers from Thomas Heath Track Layout redesigned to be almost the same as stock on the back. All graphics replaced and outline adjusted with curves.
Three options are uploaded.
I've done a drawing to make a self adhesive vinyl sticker. This is to be affixed to the back so that it is the same as stock.
I have not found a suitable suplier yet.
if I cannot get stickers I will probably use 50mm wide PVC tape on the back of mine and then cut it out with a craft knife or exacto blade
These Tactile switches have the correct measurements. Tact Button Switch 6x6x4.3mm https://www.mouser.co.uk/ProductDetail/Omron-Electronics/B3F-1000?qs=lK7M36XCk6JQHckSc1xIsg%3D%3D https://www.digikey.co.uk/en/products/detail/omron-electronics-inc-emc-div/B3F-1000/33150
The connector that plugs into the motherboard is JST PHD 2mm 10 way connector. https://www.jst.co.uk/productSeries.php?pid=88&cat=30 I bought some of these off ali express. You could solder them on directly or use another suitable connector. https://www.aliexpress.com/item/1005005940137789.html?spm=a2g0o.order_list.order_list_main.17.1e5b1802rfvPIm
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | LOGO | LOGO | G, G***, G***, G***, G***, G*** |
| 2 | 100_0603 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | Blue_56mcd_0603 | LED_SMD:LED_0603_1608Metric | HDD_LED1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J2 |
| 1 | Conn_01x09_Pin | Connector_PinHeader_2.00mm:PinHeader_1x09_P2.00mm_Vertical | J1 |
| 1 | LED_Dual_AKA - LEFT | LED_THT:LED_D3.0mm-3 | D1 |
| 1 | LED_Dual_AKA - Right | LED_THT:LED_D3.0mm-3 | D2 |
| 1 | Red_100mcd_0603 | LED_SMD:LED_0603_1608Metric | LAN_LED1 |
| 1 | SW_Push Power | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | POWER |
| 1 | SW_Push-EJECT | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | EJECT |

ChrisGPlugs/OGXBOX_Front_Buttons
Original Xbox Front panel Circuit board recreated in KiCad - Additional locations for HDD and LAN LEDs added

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 80 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ChrisGPlugs/OGXBOX_Front_Buttons repository on GitHub, at the commit this page was made from: the board is XBox button board/XBox button board.kicad_pcb and its schematic XBox button board - no HDD-LAN - All tracks front/XBox button board_no_LAN-HDD_all tracks front.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ChrisGPlugs before reusing the design.