
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly

Part cyberdeck, part ortholinear. With 2 knobs and 2 large OLED displays, this keyboard can be used for animations, displaying information, or for controlling a GUI.
Mekko5X is an open-source printed circuit board by ChrisChrisLoLo, from the ChrisChrisLoLo/mekko5X repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 190.5 × 131 mm with 98 parts on 84 nets, routed with 465 tracks and 134 vias.
Its parts include 43 switches, 42 diodes and 3 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Part cyberdeck, part ortholinear. With 2 knobs and 2 large OLED displays, this keyboard can be used for animations, displaying information, or for controlling a GUI. The small form factor makes the board a unique ortholinear keyboard, or a powerful macropad. It could also double as a MIDI controller!
Powered by a Raspberry Pi Pico, this keyboard should have more than enough space and power for any kind of firmware you have in mind!
Pre-prototyping phase. Playing around with setting up the OLED drivers, and will look into how to get it working with QMK. Testing pending. Copy and build if you're sure you know what you're doing. BYO firmware.
Big thank you to PCBWay for greenlighting and sponsoring a project such as this! Overtime, I've come to appretiate the quality of the silkscreen and soldermask boards I get from PCBWay, and would strongly consider them if I had to sell or give a quality PCB to a friend or and customer. PCBWay has also given back to the community by supporting projects like these, so I strongly recommend them if you're looking to make a board for yourself!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | 1N4148 | Diode_SMD:D_MiniMELF_Handsoldering | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +26 |
| 41 | SW_SPST | keyswitches:Kailh_socket_MX | SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +25 |
| 9 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2, H3, H4, H5, H6, H7, H8, H9 |
| 2 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2 |
| 2 | SSD1309 | custom:2.4_inch_OLED | U1, U2 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U3 |
The 97 most common of 98 parts.

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly




PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)


joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

c0pperdragon/C64-Video-Enhancement
Component video modification for the C64 8-bit computer
It measures 190.5 × 131 mm and has 2 copper layers, 1.6 mm thick.
98 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ChrisChrisLoLo/mekko5X repository on GitHub, at the commit this page was made from: the board is pcb/mekko5X/mekko5X.kicad_pcb and its schematic pcb/mekko5X/mekko5X.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).