Skip to the content
2 layers45 × 31.5 mmStealthBurner, the printed circuit board in 3D

一个美观的集线板设计

Size
45 × 31.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
19
Pads
47
Tracks, vias
124, 17
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
22 May 2022
Updated
17 Jun 2022

Overview

StealthBurner is an open-source printed circuit board by CharlieYu4994, from the CharlieYu4994/StealthBurner-toolhead-pcb repository on GitHub. It is a 2-layer board of 45 × 31.5 mm with 15 parts on 19 nets, routed with 124 tracks and 17 vias.

It is built around the BAT85. Its parts include 9 connectors, 2 inductors and 1 diode.

Main components

1

README

README.md

StealthBurner-PCB

为 Voron Design 最新的 StealthBurner 设计的集线 PCB 板

在线 BOM 表:http://blog.charlie.moe/StealthBurner-toolhead-pcb/bom/bom

特点

  • 自带一个 NTC 3950 10K 的热敏电阻,可以用于测试仓温
  • 使用 StealthBurner 官方的固定孔位,可以无损兼容现有打印件
  • 使用 18 根线,比直连更省线材

使用

打样

使用「gerber」文件夹内的文件即可,建议使用 1mm 板厚,10mil 最小线宽

接线

pinout

  1. 将 5v 连接到 LED 的 5v 电源,将 DATA 连接到 LED 信号引脚
  2. 将 V_FAN 连接到你使用的风扇电源正极(两个风扇只能使用同一电压),将 PCF 和 HEF 连接到对应风扇负极
  3. 将 +24v 连接到探头电源,将 P_SIG 连接到探头信号引脚
  4. 将 GNDA 连接到测温接口的负极,将 CBT 和 HET 连接到对应侧温接口的正极(两个热敏电阻共地)
  5. 将 A+/A-/B+/B- 连接到步进电机驱动
  6. 将 HE+/HE- 连接到热端加热器接口

Parts

15
QtyValueFootprintReferences
2M3_holeMountingHole_User:MountingHole_3.2mm_M3_UserM1, M2
1BAT85Diode_THT:D_DO-35_SOD27_P2.54mm_Vertical_AnodeUpD1
1CBTResistor_SMD:R_0805_2012MetricTH1
1E-StepConnector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_VerticalJ2
1FSConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ5
1HEConnector_Molex:Molex_Micro-Fit_3.0_43045-0200_2x01_P3.00mm_HorizontalJ3
1HEFConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ6
1HETConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ4
1LassiCat OrganizationLogos_User:LassiCat_LogoL1
1MCUConnector_Molex:Molex_Micro-Fit_3.0_43045-1800_2x09_P3.00mm_HorizontalJ9
1NEOConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ8
1PCFConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ7
1PROBEConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ1
1Voron HexLogos_User:Voron_Logo_HexL2

Similar boards

  • 2 layers213 × 65.1 mmSizif512, the printed circuit board in 3D

    Sizif512

    UzixLS/zx-sizif-512

    ZX Spectrum CPLD-based clone for rubber case

    214 parts195MIT
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers66 × 99 mmNucleo32TNC, the printed circuit board in 3D

    Nucleo32TNC

    mobilinkd/NucleoTNC

    The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3.

    54 parts110GPL-3.0
  • 2 layers28.6 × 36.8 mmZXROM-4in1, the printed circuit board in 3D

    ZXROM-4in1

    pmandes/zx-spectrum-issue6a-replica

    ZX Spectrum 48k Issue 6A board replica

    9 parts52
  • 2 layers140 × 85 mmSizif128, the printed circuit board in 3D

    Sizif128

    UzixLS/zx-sizif-128

    Easy-to-build minimalistic ZX Spectrum clone

    112 parts34MIT
  • 2 layers20 × 110 mmNode main, the printed circuit board in 3D

    Node main

    attoparsec/Node

    KiCAD project and Arduino code for the Node module

    47 parts19
  • 2 layers335 × 250 mmACE Board, the printed circuit board in 3D

    ACE Board

    acwright/6502-ACE

    6502-ACE 8-Bit Retro Computer Project

    205 parts12CERN-OHL-P-2.0
  • 2 layers36.4 × 31.8 mmMB9X UART, the printed circuit board in 3D

    MB9X UART

    famicomical/MB9X-UART

    In-system Serial Programming Adapter for Fujitsu F2MC-16LX microcontrollers

    15 parts6

Questions

How big is the StealthBurner PCB?

It measures 45 × 31.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the StealthBurner use?

15 parts, built around the BAT85. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the StealthBurner KiCad files?

From the CharlieYu4994/StealthBurner-toolhead-pcb repository on GitHub, at the commit this page was made from: the board is StealthBurner.kicad_pcb and its schematic StealthBurner.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the StealthBurner design in my own project?

Its repository states no licence, so its author keeps all rights: ask CharlieYu4994 before reusing the design.