
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Cat feeding machine is an open-source printed circuit board by CharleezGithub, from the CharleezGithub/IoT-Project-Feeder repository on GitHub. It is a 2-layer board with 11 parts on 36 nets, routed with 74 tracks and 0 vias.
Its parts include 8 connectors, 2 ICs and 1 switch.
External Arduino Libraries used:
https://www.arduinolibraries.info/libraries/speedy-stepper
https://www.arduinolibraries.info/libraries/liquid-crystal_i2-c
https://www.arduinolibraries.info/libraries/esp32-time
Internal Libraries Used:
time.h
WebServer.h
HardwareSerial.h
WiFi.h
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 9V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | 9V_WP | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | LCD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | MOTOR_PINS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | RELAY_PUMP | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Supersonic sensor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | UART_PINS | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Water sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | ~ | ESP8266:ESP8266_HOMEMADE | U1 |
| 1 | ~ | ESP8266:TMC2209_homemade | U2 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CharleezGithub/IoT-Project-Feeder repository on GitHub, at the commit this page was made from: the board is cat feeding machine/cat feeding machine.kicad_pcb and its schematic cat feeding machine/cat feeding machine.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CharleezGithub before reusing the design.