Skip to the content
2 layers25.4 × 17.8 mmBreakout, the printed circuit board in 3D

A dual-supply compatible 10-bit digital potentiometer.

Size
25.4 × 17.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
18
Pads
60
Tracks, vias
91, 17
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
5 Feb 2023
Updated
20 May 2023

Overview

Breakout is an open-source printed circuit board by CedarGroveStudios, from the CedarGroveStudios/PCB_AD5293_Digital_Potentiometer repository on GitHub. It is a 2-layer board of 25.4 × 17.8 mm with 21 parts on 18 nets, routed with 91 tracks and 17 vias.

Its parts include 7 capacitors, 4 resistors, 3 diodes, 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.

README

README.md

PCB_AD5293_Digital_Potentiometer

A small breakout board for the 100K AD5293 digital potentiometer.

Image During Initial Test

The AD5293 Digital Potentiometer is an SPI, 100K-ohm device. The potentiometer sports 1024 resistance steps. The digital logic power requires 2.7v to 5.5v. The potentiometer circuit operates with dual analog supply voltages from +/-9v to +/-16.5v. The pins act similarly to a passive resistive potentiometer, but require that voltages placed on any of the three pins not exceed the analog power supply voltages.

The Cedar Grove AD5293 custom breakout board provides power and signal connections for SPI and the potentiometer chip. The AD5293 is also used in the AD9833-based Cedar Grove Precision VCO Eurorack module.

A CircuitPython library is available: https://github.com/CedarGroveStudios/CircuitPython_AD5293

Order from OSH Park

Parts

21
QtyValueFootprintReferences
410KResistor_SMD:R_0805_2012MetricR1, R2, R3, R4
30.1uFCapacitor_SMD:C_0805_2012MetricC2, C4, C6
310uFCapacitor_SMD:C_0805_2012MetricC3, C5, C7
2SD0805Diode_SMD:D_0805_2012MetricD3, D4
11uFCapacitor_SMD:C_0805_2012MetricC1
1AD5293Package_SO:TSSOP-14_4.4x5mm_P0.65mmU1
1BKOUT_PINSConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ1
1LOGOCedarGrove_custom:CedarGroveStudios_TEXT_LOGO_8x5_4mmG***
1POTENTIOMETERConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ2
1PWRLED_SMD:LED_0805_2012MetricD1
1SDO PULL-UPJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1

The 19 most common of 21 parts.

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the Breakout PCB?

It measures 25.4 × 17.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Breakout use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Breakout KiCad files?

From the CedarGroveStudios/PCB_AD5293_Digital_Potentiometer repository on GitHub, at the commit this page was made from: the board is PCB/breakout.kicad_pcb and its schematic PCB/breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask CedarGroveStudios before reusing the design.