4 layers110 × 110 mm
Smoothiev2-prime
Smoothieware/Smoothieboard2
Hardware files for the Smoothieboard v2, and extension boards
453 parts71
4 layers219.5 × 39.5 mm
16seg Module
CatoLynx/16_Segment_Display_HW_Module18x 16-segment LED module with static constant current drive
- Size
- 219.5 × 39.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 168
- Pads
- 438
- Tracks, vias
- 1,051, 171
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 May 2021
- Updated
- 6 May 2021
Overview
16seg Module is an open-source printed circuit board by CatoLynx, from the CatoLynx/16_Segment_Display_HW_Module repository on GitHub. It is a 4-layer board of 219.5 × 39.5 mm with 47 parts on 168 nets, routed with 1,051 tracks and 171 vias.
It is built around the 74HCT541D and TLC5928PWPR. Its parts include 18 ICs, 11 capacitors, 9 resistors and 3 connectors.
Main components
2
74HCT541D
SO-20-40℃~+125℃ 1 15ns@4.5V,50pF 160uA 4.5V~5.5V 6mA 6mA 74HCT 8 Tri-State Unidirectional SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversTLC5928PWPR
HTSSOP-24-40℃~+85℃ 1% 16 17V 35MHz 35mA 3V~5.5V Over-Temperature Protection (OTP) HTSSOP-24 LED Drivers ROHSTexas InstrumentsLED Drivers
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitors_SMD:C_0603 | C1, C2, C3, C4, C6, C7, C8, C9, C10, C11 |
| 8 | 16seg_PSA12-11SRWA | custom:16seg_PSA12-11SRWA | U1, U2, U3, U4, U11, U12, U13, U14 |
| 8 | 2.4k | Resistors_SMD:R_0603 | R1, R2, R3, R4, R6, R7, R8, R9 |
| 8 | TLC5928PWPR | custom:TSSOP-24_EP_4.4x7.8mm_Pitch0.65mm | U5, U6, U7, U8, U15, U16, U17, U18 |
| 1 | 100µ | Capacitors_Tantalum_SMD:CP_Tantalum_Case-D_EIA-7343-31_Reflow | C5 |
| 1 | 74HCT541 | Housings_SOIC:SOIC-20W_7.5x12.8mm_Pitch1.27mm | U9 |
| 1 | 887R | Resistors_SMD:R_0603 | R5 |
| 1 | Input | custom:Conn_IDC_2x3_SMD | J3 |
| 1 | LOGO | custom:cato_small | G*** |
| 1 | Output | custom:Conn_IDC_2x3_SMD | J2 |
| 1 | Power | custom:Conn_P3.96mm_1x02_vertical_THT | J1 |
| 1 | TLC5916IPWR | Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mm | U10 |
The 42 most common of 47 parts.
Similar boards
- 2 layers99.1 × 49.9 mm
- 6 layers158 × 174 mm
TritonECU Main
alpauna/TritonECU
ESP32-S3 engine control unit — fuel injection, ignition timing, wideband O2 (CJ125/LSU 4.9), dashboard, and MQTT telemetry
457 parts10 - 2 layers214.6 × 123.2 mm
- 2 layers100 × 100 mm
ADAT IO x4
freeDSP/freeDSPx-ADAT-IO-x4
The freeDSPx ADAT IO x4 is a digital IO expansion board for the freeDSP family. It provides 4 Lightpipe(I2S) inputs and 4 Lightpipe outputs via single Toslink Cable.
124 parts10 - 2 layers200 × 150 mm
- 2 layers87 × 56 mm
- 4 layers150 × 72 mm
FIAControl
CatoLynx/LCD-FIA
Custom hardware and software for a LCD platform passenger information display
110 parts7
Questions
How big is the 16seg Module PCB?
It measures 219.5 × 39.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the 16seg Module use?
47 parts, built around the 74HCT541D and TLC5928PWPR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 16seg Module KiCad files?
From the CatoLynx/16_Segment_Display_HW_Module repository on GitHub, at the commit this page was made from: the board is 16seg_Module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 16seg Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask CatoLynx before reusing the design.