Skip to the content
2 layers257.2 × 95.3 mmKiCad Project, the printed circuit board in 3D

KiCad Project

CatGirlGF/Bonzo15

Custom pseudo 40% keyboard

Size
257.2 × 95.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
111
Nets
78
Pads
522
Tracks, vias
553, 31
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
3 May 2022
Updated
5 Jan 2023

Overview

KiCad Project is an open-source printed circuit board by CatGirlGF, from the CatGirlGF/Bonzo repository on GitHub, published under the MIT licence. It is a 2-layer board of 257.2 × 95.3 mm with 111 parts on 78 nets, routed with 553 tracks and 31 vias.

Its parts include 54 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Bonzo

Pro Micro based custom pseudo 40% keyboard inspired by V4N4G0N

Bonzo

Kicad libraries used:

https://github.com/AcheronProject/AlexandriaLibrary https://github.com/keebio/Keebio-Parts.pretty https://github.com/ai03-2725/MX_Alps_Hybrid/tree/master/MX_Only.pretty

Gerbers

The provided gerbers have been created according to the specifications of JLCpcb. For plate the size is 275.3mm * 113.4mm

Cases

Acryllic case

The case is designed to be cut out of 3mm acryllic and uses a 1.5mm switchplate.

I used 4mm female to female M2 standoffs from this listing: https://www.aliexpress.com/item/1005003106030065.html

https://i.imgur.com/W8KVRhH.png Picture for reference if the listing gets deleted

3D printable case WIP

This case has been printed fully and works, but the screwholes are too tight and have to be drilled.

Updated case design with heat insrets and correct size holes at some point.

Firmware

I have provided a compiled .hex and a layout json that will let you use the keyboard with VIA.

The full QMK library is also provided incase it is needed.

BOM

General parts for wired

NamePiecesDescription
PCB1Gerbers available at this repository
1,5mm switch plate1Gerbers available at this repository
2U PCB mount stabilizer3Also known as screw-in stabilizers
MX hotswap sockets54Kailh or equivalent
MX style switch54
1N4148 diodes54SOD-123 packaging
ProMicro or similar1

For Wireless

NamePiecesDescription
PCB1Gerbers available at this repository
1,5mm switch plate1Gerbers available at this repository
2U PCB mount stabilizer3
MX hotswap sockets54Kailh or equivalent
MX style switch54
1N4148 diodes54SOD-123 packaging
nice!nano v21
LiPo battery1Refer to nice!nano's documentation on battery suggestions
Slide switch1JS202011AQN or similar
For acryllic case
NamePiecesDescription
Acrylic layers1 of eachFiles available in this repository
4-6mm M2 female - female standoffs8Hexagon shaped ones won't fit
M2 screws16
For 3DP case
NamePiecesDescription
Top case1
Bottom case1
M2x15 screws4Self-tapping screws are recommended
M2x10 screws4Self-tapping screws are recommended

Keycaps

You will also need keycaps to fit the layout pictured below layout

Disclaimer

Everything in this repo has been published with intent to allow others to build this keyboard if they want to and is published under MIT License. The versions I have uploaded have been tested to work. I take no responsibility of designs being incorrect or flawed. Check all the files yourself before you purchase anything. If something is broken or missing please let me know and ill try and see if I can fix the issue.

Also here is the cat who inspired the name and the silkscreen The boy

Parts

111
QtyValueFootprintReferences
54D_SmallKeebio-Parts:D_SOD123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +38
47MX-NoLEDMX_Only:MXOnly-1U-HotswapMX-1, MX;1, MX:1, MX1, MX2, MX3, MX4, MX5, MX6, MXA1, MXAA1, MXAAA1, MXB1, MXC1, MXD1, MXDOWN1 +31
3MX-NoLEDMX_Only:MXOnly-1.25U-HotswapMXALT1, MXCTRL1, MXTAB1
1LOGOSilkscreenit:BonzotextG***
1LOGOSilkscreenit:lurker_bonzo_longG***
1MX-NoLEDMX_Only:MXOnly-2.25U-Hotswap-ReversedStabilizersMXSPACE3
1MX-NoLEDMX_Only:MXOnly-2.75U-Hotswap-ReversedStabilizersMXSPACE1
1MX-NoLEDMX_Only:MXOnly-1.5U-HotswapMXSHIFT1
1MX-NoLEDacheron_MXH:MX_ISOEnter_VerticalHMXENTER1
1ProMicroKeebio-Parts:ArduinoProMicroU1

Similar boards

  • 2 layers90 × 135 mmVoron badge, the printed circuit board in 3D

    Voron badge

    tanaes/whopping_Voron_mods

    111 parts787GPL-3.0
  • 2 layers79 × 38 mmEthersweep, the printed circuit board in 3D

    Ethersweep

    Neumi/ethersweep

    Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

    111 parts587
  • 2 layers50.8 × 62.2 mmESP32-GATEWAY Rev I, the printed circuit board in 3D

    ESP32-GATEWAY Rev I

    OLIMEX/ESP32-GATEWAY

    ESP32 IoT Gateway board with BLE WIFI and Ethernet

    111 parts322Apache-2.0
  • 2 layers224 × 72 mmTanuki pcb3, the printed circuit board in 3D

    Tanuki pcb3

    SethSenpai/Tanuki

    An open source 40% keyboard

    111 parts286MIT
  • 2 layers58.4 × 50 mmPinpoint core, the printed circuit board in 3D

    Pinpoint core

    lab11/polypoint

    Indoor localization based on the DecaWave DW1000.

    111 parts143Apache-2.0
  • 2 layers164 × 95.3 mmTPS, the printed circuit board in 3D

    TPS

    DreaM117er/Explorer-Keyboard-Blank

    The 3rd Explorer Keyboard series, a Planck like split keyboard with muti cursor unit.

    111 parts77MIT
  • 2 layers85 × 56.5 mmModemHAT, the printed circuit board in 3D

    ModemHAT

    astuder/ModemHAT

    Classic Phone Modem HAT for the Raspberry Pi

    111 parts56
  • 2 layers145 × 145 mmNeofighter, the printed circuit board in 3D

    Neofighter

    w4ilun/neofighter

    A MIDI controller using arcade buttons with RGB lighting effects

    111 parts51

Questions

How big is the KiCad Project PCB?

It measures 257.2 × 95.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KiCad Project use?

111 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KiCad Project KiCad files?

From the CatGirlGF/Bonzo repository on GitHub, at the commit this page was made from: the board is KiCad Projects/Bonzo_PCB/KiCad Project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the KiCad Project design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).