Skip to the content
2 layers93.4 × 57.9 mmESP32 RST Monitoring, the printed circuit board in 3D

This project is a module to monitor the status of a 3-phase electricity supply and record any power outages. The data can be accessed wirelessly. Currently, the features are limited to detecting the power state only.

Size
93.4 × 57.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
53
Pads
124
Tracks, vias
263, 16
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
1 Jun 2025
Updated
1 Jun 2025

Overview

ESP32 RST Monitoring is an open-source printed circuit board by CasuariusSYC, from the CasuariusSYC/3-Phase-Electricity-Monitoring repository on GitHub. It is a 2-layer board of 93.4 × 57.9 mm with 32 parts on 53 nets, routed with 263 tracks and 16 vias.

It is built around the ESP32-DEVKITC-32E, L7805 and PC817C, with the SS14 among its other parts. Its parts include 7 resistors, 6 capacitors, 6 transistors, 4 diodes and 4 connectors. It belongs with the ESP32 boards of this library.

Main components

4

README

README.md

3-Phase-Electricity-Monitoring

This project is a module to monitor the status of a 3-phase electricity supply and record any power outages. The data can be accessed wirelessly. Currently, the features are limited to detecting the power state only.

This project was inspired by my father’s question about whether it’s possible to create a device that records power outages at the TV transmitter station where he works.

In the PCB, I use two optocouplers on each phase to capture the full-wave signal. Then, I filter the output with a capacitor to obtain a clean DC signal, which is connected to the ESP32’s I/O pins.

Parts

32
QtyValueFootprintReferences
6PC817CPC817C:PC817CQ1, Q2, Q3, Q4, Q5, Q6
3CCapacitor_SMD:C_Elec_4x5.4C4, C5, C6
3LD271LED_THT:LED_D5.0mm_IRGreyD2, D3, D4
3RResistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_HorizontalR2, R3, R4
3RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R6, R7
210uFCapacitor_SMD:CP_Elec_4x5.4C1, C2
2LOGOLOGOG***, G***
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_Kycon_KLDX-0202-xC_HorizontalJ2
1CK_KMS2xxGButton_Switch_SMD:SW_SPST_CK_KMS2xxGSW1
1Conn_01x06_PinConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_HorizontalJ4
1ESP32-DEVKITC-32EESP:MODULE_ESP32-DEVKITC-32EU2
1L7805Package_TO_SOT_SMD:TO-252-3_TabPin2U1
1SS14Diode_SMD:D_SMAD1
1Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ1
1Screw_Terminal_01x04TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05504HBWC_1x04_P5.00mm_HorizontalJ3

Similar boards

  • 2 layers52 × 70 mmTaptempo smd, the printed circuit board in 3D

    Taptempo smd

    Valleeh/taptempo-box

    Tap-tempo box: MIDI clock + switched tempo outputs, ATmega328P, perfboard and JLCPCB SMD versions, 3D-printed enclosure

    45 partsMIT
  • 4 layers160 × 100 mmSmu main, the printed circuit board in 3D

    Smu main

    PaulBichl/vibepcb-smu

    VibePCB example: 4-quadrant SMU (+-30 V / +-1 A, USB-C PD, Ethernet) designed with an LLM

    244 parts1
  • 2 layers40 × 20 mmB PC817C 2CH BRK R1.0, the printed circuit board in 3D

    B PC817C 2CH BRK R1.0

    Boardoza/Boardoza_PC817C_2CH_Isolated_Level_Shifter_Breakout_Board

    Dual-channel optically isolated level shifter board using Sharp PC817C for safe voltage conversion between 3.3V–12V systems.

    19 partsCC-BY-SA-4.0
  • 2 layers46.3 × 67.5 mmBLERelayShield, the printed circuit board in 3D

    BLERelayShield

    Dinamiet/BLERelayPCB

    Shield between Particle relay board and Particle Xenon

    26 parts
  • 2 layers99 × 90 mmHomeyPCB, the printed circuit board in 3D

    HomeyPCB

    jadam3k/Homey

    Home Asistance/Industrial PLC

    99 parts
  • 2 layers26 × 72 mmDoor adapter, the printed circuit board in 3D

    Door adapter

    reitermarkus/door-server

    10 parts2
  • 2 layers232.6 × 49.5 mmA FOUR CHANNEL, the printed circuit board in 3D

    A FOUR CHANNEL

    laforestlabs/KiCraft

    KiCad PCB automation toolkit — placement, routing, scoring, and experiment management

    19 parts
  • 4 layers74.7 × 114.6 mmWateringSystem, the printed circuit board in 3D

    WateringSystem

    cryptotomte/WateringSystem

    powershell # Build project & "C:\Users\crypt\.platformio\penv\Scripts\pio.exe" run --environment wateringsystem

    46 partsAGPL-3.0

Questions

How big is the ESP32 RST Monitoring PCB?

It measures 93.4 × 57.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32 RST Monitoring use?

32 parts, built around the ESP32-DEVKITC-32E, L7805, PC817C and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32 RST Monitoring KiCad files?

From the CasuariusSYC/3-Phase-Electricity-Monitoring repository on GitHub, at the commit this page was made from: the board is PCB-File/Project-File/ESP32 RST Monitoring.kicad_pcb and its schematic PCB-File/Project-File/ESP32 RST Monitoring.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32 RST Monitoring design in my own project?

Its repository states no licence, so its author keeps all rights: ask CasuariusSYC before reusing the design.