2 layers100 × 50 mm
Nixie control board
alxhoff/Nixie-tube-clock
Firmware for a nixie tube clock based on STM32 hal libraries
43 parts1GPL-3.0
2 layers50.8 × 44.4 mm
NixiePowerSupply
CarlRaymond/NixiePowerSupplyA KiCad project for a high-voltage Nixie tube power supply.
- Size
- 50.8 × 44.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 10
- Pads
- 48
- Tracks, vias
- 82, 23
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 Mar 2017
- Updated
- 8 May 2017
Overview
NixiePowerSupply is an open-source printed circuit board by CarlRaymond, from the CarlRaymond/NixiePowerSupply repository on GitHub. It is a 2-layer board of 50.8 × 44.4 mm with 21 parts on 10 nets, routed with 82 tracks and 23 vias.
It is built around the MAX1771CPA+, ES2F and IRF644. Its parts include 6 capacitors, 3 connectors, 2 resistors, 1 IC and 1 diode.
Main components
3
MAX1771CPA+
PDIP-80℃~+70℃@(TA) 1 300kHz 3V~16.5V Boost Boost External No PDIP-8 DC-DC Converters ROHSMaxim Integrated (Analog Devices)DC-DC Converters
ES2F
DO-214AA(SMB)Switching DiodesDIOTEC
IRF644
TO-220AB-55℃~+150℃ 1 N-channel 1.3nF 125W 14A 250V 280mΩ@10V 320pF 4V 59nC@10V 69pF N-Channel TO-220AB MOSFETsTexas InstrumentsMOSFETs
README
README.mdA KiCad project for a high-voltage Nixie tube power supply.
Adapted from Nick DeSmith's design at http://www.desmith.net/NMdS/Electronics/NixiePSU.html.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | Capacitors_SMD:C_0805_HandSoldering | C2, C3 |
| 1 | 100nF, 250V | nixie:Panasonic_ECWU_Size_B | C6 |
| 1 | 100uF, 35V | Capacitors_Tantalum_SMD:CP_Tantalum_Case-X_EIA-7343-43_Hand | C1 |
| 1 | 100uH | nixie:L-B82479A1 | L1 |
| 1 | 10K | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 10uF,250V | Capacitors_SMD:CP_Elec_10x10 | C4 |
| 1 | 10uF,25V | Capacitors_Tantalum_SMD:CP_Tantalum_Case-X_EIA-7343-43_Hand | C5 |
| 1 | 1M5 | Resistors_SMD:R_2512_HandSoldering | R2 |
| 1 | 50m | Resistors_SMD:R_2010_HandSoldering | Rsense1 |
| 1 | 5K | nixie:Trimpot_Bourns_3214W | VR1 |
| 1 | BARREL_JACK | nixie:BARREL_JACK_ROUND_HOLES | J1 |
| 1 | CONN_01X02 | nixie:Pin_Header_Straight_1x03_Pitch2.54mm_No_Center | P2 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P1 |
| 1 | ES2F | nixie:ES2F | D1 |
| 1 | IRF644 | TO_SOT_Packages_THT:TO-220_Vertical | T1 |
| 1 | MAX1771 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
The 17 most common of 21 parts.
Similar boards
- 4 layers65 × 33 mm
- 4 layers150 × 100 mm
- 2 layers49.5 × 44.5 mm
Hv power supply
wheeler-microfluidics/kicad___hv_power_supply
Digitally adjustable high-voltage power supply
19 parts1 - 2 layers83.8 × 56.1 mm
Hv signal generator
wheeler-microfluidics/hv-signal-generator.kicad
Control board and high-votlage signal generator for the MR Box
49 parts - 4 layers189 × 55 mm
Nixie
pimborman/nixie-clock
This repository contains the design files of my own nixie clock. The last version is hosted on my Github Page.
70 parts - 2 layers147.3 × 95.3 mm
Nixie proj conflict-20171112-163801
dm2lct/tlnixie
PCB files for the Turmlabor nixie clock 2.0
117 parts11GPL-3.0 - 2 layers
Questions
How big is the NixiePowerSupply PCB?
It measures 50.8 × 44.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NixiePowerSupply use?
21 parts, built around the MAX1771CPA+, ES2F and IRF644. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NixiePowerSupply KiCad files?
From the CarlRaymond/NixiePowerSupply repository on GitHub, at the commit this page was made from: the board is NixiePowerSupply.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NixiePowerSupply design in my own project?
Its repository states no licence, so its author keeps all rights: ask CarlRaymond before reusing the design.