
Gurt portable
CarlFabian/gurt-portable
A wireless portable keyboard with a 34 key layout.

A wireless portable keyboard with a 34 key layout.
Gurt portable is an open-source printed circuit board by CarlFabian, from the CarlFabian/gurt-portable repository on GitHub, published under the MIT licence. It is a 2-layer board of 119.6 × 98.8 mm with 22 parts on 49 nets, routed with 215 tracks and 22 vias.
A wireless portable keyboard with a 34 key layout designed with simplicity in mind.

This keyboard was based of durken1's pierce. The building instructions and bill of materials is identical to the wireless version and uses the same dongle pcb. Just make sure to use the firmware from this repository or the keyboard will not work as expected. Big shoutout to durken1 for his amazing work and for the help I got to make this project possible.
changes:

| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | SW_PUSH | gurt-portable:Choc_PG1350_Choc_Spacing_Reversible | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17 +1 |
| 2 | Device_Battery_Cell | gurt-portable:BatteryHolder_Keystone_3034_1x20mm | BT1, BT2 |
| 2 | YJ14015 | gurt-portable:YJ-14015 | YJT1, YJT2 |
| 1 | Connector_Conn_01x04_Male | gurt-portable:PinHeader_1x04_P2.54mm_Horizontal | PROG1 |

CarlFabian/gurt-portable
A wireless portable keyboard with a 34 key layout.

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 119.6 × 98.8 mm and has 2 copper layers, 1.6 mm thick.
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CarlFabian/gurt-portable repository on GitHub, at the commit this page was made from: the board is 0.1/kicad.kicad_pcb and its schematic 0.1/kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).