2 layers17.8 × 34 mm
LinUSBConverter
uCAN-LIN/LinUSBConverter
Open source USB ↔ LIN bus dongle. LIN 2.1 master / slave / monitor, optically isolated, SLCAN compatible — no proprietary drivers.
29 parts93GPL-3.0
2 layers24.5 × 34 mm
CAN BDC
CanBrushedDCDriver/CBDCD_PCBPrinted circuit board for CanBrushedDCDriver
- Size
- 24.5 × 34 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 34
- Pads
- 129
- Tracks, vias
- 463, 23
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 10 Oct 2016
- Updated
- 16 Feb 2017
Overview
CAN BDC is an open-source printed circuit board by CanBrushedDCDriver, from the CanBrushedDCDriver/CBDCD_PCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 24.5 × 34 mm with 32 parts on 34 nets, routed with 463 tracks and 23 vias.
It is built around the STM32F042G4U6, SN65HVD232D and MCP1700T-3302E/TT(MS). Its parts include 8 capacitors, 8 connectors, 6 ICs, 2 resistors and 2 fuses. It belongs with the STM32 boards of this library.
Main components
3
STM32F042G4U6
QFN-28(4x4)-40℃~+85℃ 1.65V~3.6V 12bit 16KB 24 32 Bit 48MHz 6KB ARM Cortex-M0 Built-in FLASH QFN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
SN65HVD232D
SOIC-8-40℃~+85℃ 17mA 1Mbps 3.3V CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
MCP1700T-3302E/TT(MS)
SOT-23-40℃~+85℃@(Ta) 1 120uVrms 180mV@(300mA) 2uA 3.3V 300mA 5.5V 80dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdCBDCD_PCB
Printed circuit board for CanBrushedDCDriver
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P4, P5, P8 |
| 3 | GS2 | Connect:GS2 | GS1, GS2, GS3 |
| 2 | 1u | Capacitors_SMD:C_0402 | C3, C5 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P1, P9 |
| 2 | fiducial | Fiducials:Fiducial_1mm_Dia_2.54mm_Outer_CopperTop | f1, f2 |
| 2 | fiducial | usb_ccb_custom:1pin | mh1, mh2 |
| 1 | 100n | Capacitors_SMD:C_0402 | C1 |
| 1 | 100nC | Capacitors_SMD:C_0402 | C9 |
| 1 | 100u | Capacitors_SMD:c_elec_6.3x5.3 | C4 |
| 1 | 100u | Capacitors_SMD:c_elec_5x5.8 | C7 |
| 1 | 10k | Resistors_SMD:R_0402 | R5 |
| 1 | 10n | Capacitors_SMD:C_0402 | C2 |
| 1 | 10nC | Capacitors_SMD:C_0402 | C8 |
| 1 | 120 | Resistors_SMD:R_0603 | R4 |
| 1 | 1uH | Capacitors_SMD:C_1206 | L2 |
| 1 | CONN_01X02 | Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | P6 |
| 1 | CONN_01X04 | Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_4pol | P7 |
| 1 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch1.27mm_SMD_Pin1Left | P2 |
| 1 | MCP1700T-3302E/TT | TO_SOT_Packages_SMD:SOT-23 | U6 |
| 1 | Mini-360 | usb_ccb_custom:Mini-360 | U5 |
| 1 | POLOLU_DRV8825/DRV8801 | usb_ccb_custom:POLOLU_A4988 | U3 |
| 1 | PSD2CAN | TO_SOT_Packages_SMD:SOT-23 | U1 |
| 1 | SN65HVD232D | SO:SO | U2 |
| 1 | STM32F042G4U6 | usb_ccb_custom:UFQFPN_28 | U4 |
Similar boards
- 2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers89.8 × 10.2 mm
- 2 layers79.2 × 59.2 mm
- 2 layers85 × 54 mm
Gps mezzanine
96boards/mezzanine-community
Repository for community designed mezzanine boards for the 96boards specification.
182 parts32 - 4 layers320 × 320 mm
- 2 layers110 × 80 mm
TeensyShield progLED
samuelclay/grove
Grove is the forest inside your lungs. An interactive biofeedback art installation at Burning Man 2016
85 parts16 - 2 layers31.2 × 17.1 mm
Knox Key Kicad
Kingdragoncat/Knox-Key
Knox Key is a high-performance, open-source hardware authenticator designed for secure digital identity and cryptographic operations.
29 parts5
Questions
How big is the CAN BDC PCB?
It measures 24.5 × 34 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CAN BDC use?
32 parts, built around the STM32F042G4U6, SN65HVD232D and MCP1700T-3302E/TT(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CAN BDC KiCad files?
From the CanBrushedDCDriver/CBDCD_PCB repository on GitHub, at the commit this page was made from: the board is CAN_BDC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CAN BDC design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).