
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

PCB to breakout the NovAtel OEM719 GNSS receiver PCB for development and testing
OEM719 Breakout PCB is an open-source printed circuit board by CalgaryToSpace, from the CalgaryToSpace/OEM719-GNSS-Breakout-PCB repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 165 × 61 mm with 29 parts on 26 nets, routed with 324 tracks and 56 vias.
Its parts include 7 connectors and 4 resistors. It belongs with the interfaces and adapters boards of this library.
PCB to breakout the NovAtel OEM719 GNSS receiver PCB for development and testing
This PCB serves the following purposes:


| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H_DMC3_1, H_DMC3_2, H_DMC3_3, H_DMC3_4, H_OEM_1, H_OEM_2, H_OEM_3, H_OEM_4, H9, H10, H11, H12, H13, H14 |
| 4 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 4 | LED | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D_MISO_1, D_MOSI_1, D_PPS_1, D_VCC_1 |
| 2 | Conn_02x10_Odd_Even | 00-footprint-lib:PinHeaderSocket_2x10_P2.54mm_Vertical | J6, J7 |
| 1 | 2.54mm Header | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | 2.54mm Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J5 |
| 1 | Conn_02x10_Odd_Even | 00-footprint-lib:PinHeader_2x10_P2.00mm_Vertical_to_DMC3 | J1 |
| 1 | Conn_02x10_Odd_Even | 00-footprint-lib:PinSocket_2x10_P2.00mm_Vertical_for_OEM719 | J2 |
| 1 | Picoblade | 00-footprint-lib:Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal_Labelled | J3 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported


It measures 165 × 61 mm and has 2 copper layers, 1.6 mm thick.
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CalgaryToSpace/OEM719-GNSS-Breakout-PCB repository on GitHub, at the commit this page was made from: the board is OEM719_Breakout_PCB/OEM719_Breakout_PCB.kicad_pcb and its schematic OEM719_Breakout_PCB/OEM719_Breakout_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).