
Programming Connector Adapter PCB
CalgaryToSpace/CTS-SAT-1-OBC-PCB
PCB design files for the CTS-SAT-1 onboard computer

PCB design files for the CTS-SAT-1 onboard computer
CTS SAT-1-Umbilical Breakout is an open-source printed circuit board by CalgaryToSpace, from the CalgaryToSpace/CTS-SAT-1-OBC-PCB repository on GitHub. It is a 2-layer board of 87.4 × 37.1 mm with 22 parts on 15 nets, routed with 105 tracks and 49 vias.
It is built around the 1812L200/16DR. Its parts include 7 resistors, 7 diodes, 7 connectors and 1 fuse. It belongs with the interfaces and adapters boards of this library.
This is the design repository for the CTS-SAT-1 ("FrontierSat") onboard computer (OBC) PCB.
This OBC is host to an STM32 and several flash chips, and interfaces with all other electrical components on the 3U CubeSat.
This PCB uses the JLCPCB JLC04161H-2116A stackup. It is a 6-layer, impedance-controlled PCB.

It is important to consider the outgassing characteristics of all wires used, so PTFE insulation has been chosen as the standard insulation material. The recommended part number is 5853 BK005, and the maximum recommended current is 1 amp per conductor.
If constructing Space Grade PCBs, use Rogers material as it has low outgassing properties.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5, D6, D7 |
| 5 | 5k1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R4, R5, R6 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R7 |
| 2 | Conn_01x01 | TestPoint:TestPoint_Bridge_Pitch5.08mm_Drill1.3mm | J3, J4 |
| 2 | Conn_01x01 | 00-footprint-lib:EdgeAlligatorConnector | J5, J6 |
| 2 | Picoblade | Connector_Molex:Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal | J1, J7 |
| 1 | 1812L200/16DR | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J2 |

CalgaryToSpace/CTS-SAT-1-OBC-PCB
PCB design files for the CTS-SAT-1 onboard computer


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!


It measures 87.4 × 37.1 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the 1812L200/16DR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CalgaryToSpace/CTS-SAT-1-OBC-PCB repository on GitHub, at the commit this page was made from: the board is Supplemental_PCBs/CTS-SAT-1-Umbilical-Breakout/CTS-SAT-1-Umbilical-Breakout.kicad_pcb and its schematic Supplemental_PCBs/CTS-SAT-1-Umbilical-Breakout/CTS-SAT-1-Umbilical-Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CalgaryToSpace before reusing the design.