Skip to the content
2 layers66 × 79.5 mmBackplane board v1, the printed circuit board in 3D

Assembeled hardware: Image showing a module running a preliminary version of v1.0 Arduino firmware.

Size
66 × 79.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
34
Pads
61
Tracks, vias
78, 31
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
5 Mar 2023
Updated
21 Feb 2026

Overview

Backplane board v1 is an open-source printed circuit board by CMU-Robotics-Club, from the CMU-Robotics-Club/rtk-datalogger repository on GitHub. It is a 2-layer board of 66 × 79.5 mm with 8 parts on 34 nets, routed with 78 tracks and 31 vias.

Its parts include 3 ICs, 3 connectors and 1 switch.

README

README.md

Buggy Datalogger

Software setup guide

Assembeled hardware:

Image showing a module running a preliminary version of v1.0 Arduino firmware.

Image showing a module running a preliminary version of v1.0 Arduino firmware.

Project details

Parts

8
QtyValueFootprintReferences
1GPS-RTK-SMAsparkfun_parts:gps-rtk-smaU1
1I2C BreakoutConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1I2C_OLEDsparkfun_parts:i2c-oledU3
1MOUDLE-SEEEDUINO-XIAOXIAO_PCB:MOUDLE14P-2.54-21X17.8MMU2
1Micro_SD_Cardsparkfun_parts:adafruit_microsdJ3
1RST_jumpJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1
1SW_SPDTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalSW1
1USB_Bsparkfun_parts:sparkfun_usbcJ1

Similar boards

  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915
  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0

Questions

How big is the Backplane board v1 PCB?

It measures 66 × 79.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Backplane board v1 use?

8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Backplane board v1 KiCad files?

From the CMU-Robotics-Club/rtk-datalogger repository on GitHub, at the commit this page was made from: the board is backplane-board-v1/backplane-board-v1.kicad_pcb and its schematic backplane-board-v1/backplane-board-v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Backplane board v1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask CMU-Robotics-Club before reusing the design.