

First Design
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 11
- Pads
- 36
- Tracks, vias
- 89, 7
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 May 2026
- Updated
- 10 Aug 2026
Overview
First Design is an open-source printed circuit board by CAPofficial12, from the CAPofficial12/Full_DT_Project repository on GitHub. It is a 2-layer board with 12 parts on 11 nets, routed with 89 tracks and 7 vias.
It is built around the ATTINY13-20SQ. Its parts include 4 resistors, 3 diodes, 2 ICs, 2 connectors and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 3V6 | Diode_SMD:D_SOD-123F | D1, D2 |
| 2 | 68R | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | Conn_01x04 | Connector_Wire:SolderWire-0.127sqmm_1x04_P3.7mm_D0.48mm_OD1mm | J1, J2 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 1k5 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | ATtiny13-20S | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D3 |
| 1 | ~ | Custom Lib:pcb_usb | U2 |
More from CAPofficial12/Full_DT_Project
3- 2 layers81.2 × 86.3 mm

- 4 layers93.1 × 82.7 mm

- 2 layers

Similar boards
- 2 layers

Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT - 2 layers66.9 × 74.5 mm

- 2 layers40 × 15 mm

Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm

- 2 layers26 × 16.9 mm

- 2 layers49 × 25 mm

5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm

Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm

Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696
Questions
What parts does the First Design use?
12 parts, built around the ATTINY13-20SQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the First Design KiCad files?
From the CAPofficial12/Full_DT_Project repository on GitHub, at the commit this page was made from: the board is PCB Designs/First Design/First Design.kicad_pcb and its schematic PCB Designs/Complex ESP 32/KLP-5e-ESP32-sensor-board-main/KLP-5e-ESP32-sensor-board-main/KiCad project/ESP32 sensor board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the First Design design in my own project?
Its repository states no licence, so its author keeps all rights: ask CAPofficial12 before reusing the design.