
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

My manual KiCAD remake of the XM110K mouse PCB.
Xm110k proj is an open-source printed circuit board by C0m3b4ck, from the C0m3b4ck/XM110K-Mouse repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 34.5 × 66 mm with 14 parts on 14 nets, routed with 165 tracks and 0 vias.
Its parts include 3 resistors and 1 IC.
@PrinterFixer [Video title here](VIDEO HERE - IF THERE IS NONE THEN IT IS NOT DONE)
KiCAD project with GERBER and DRILL files of the XM110K Mouse, remade manually by me, C0m3b4ck. All models of all components are in place, the PCB is of accurate size. The only inacurracies are the connections, which aren't 1:1 to the actual PCB. The microswitch and the rotary encoder are the exact same but from different companies (couldn't find original companies).
The mouse is end-of-life.
This repository preserves the complete investigation of the XM110K mouse hardware: project files, documentation and images. It is intended as a technical reference for anyone analyzing, repairing, or getting inspired by the XM110K design and the KA3-based optical mouse architecture.
DOCS/ — component datasheets and board photos.XM110K-GERBER-DRILL.7z — archived Gerber/drill package.![]() PCB 3D view in KiCAD - underside. | ![]() PCB 3D view in KiCAD - top view. | ![]() PCB 3D view in KiCAD - left. | ![]() PCB 3D view in KiCAD - right. |
![]() The underside of the PCB. | ![]() View of the PCB from top. | ![]() View of the PCB from the left. | ![]() View of the PCB from the right. |
![]() The mouse case, stock photo. | ![]() Another stock photo of the mouse. | ||
![]() Schematic of full circuit. |
Project made manually by C0m3b4ck on 11/07/2026.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3, R4 |
| 2 | LED | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_Clear | +, LED2 |
| 2 | ~ | D2FT:D2FT_SW | SWL, SWR |
| 1 | SW_Push | 2pin_btn:SW_PUSH_6mm_h7.3mm | SWM |
| 1 | ~ | Capacitor_THT:C_Disc_D7.5mm_W4.4mm_P5.00mm | C_ROT1 |
| 1 | ~ | USB_direct_wire:USB_diredt_wire | CON |
| 1 | ~ | AlpineRotaryEncoder:AlpineRotaryEncoder | ENC |
| 1 | ~ | KA3_IC:KA3_IC | U1 |
The 12 most common of 14 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 34.5 × 66 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the C0m3b4ck/XM110K-Mouse repository on GitHub, at the commit this page was made from: the board is xm110k-proj/xm110k-proj/xm110k-proj.kicad_pcb and its schematic xm110k-proj/xm110k-proj/xm110k-proj.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).