

STM32G431C8T6
STM32G431C8T6 system board, temporarily designed for the 2024 Electronic Design Competition.
- Size
- 35 × 79 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 97
- Pads
- 365
- Tracks, vias
- 1,000, 292
- Pours
- 576
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 Jul 2024
- Updated
- 24 Jul 2024
Overview
STM32G431C8T6 is an open-source printed circuit board by BypassCapacitor, from the BypassCapacitor/G431_S_V1 repository on GitHub. It is a 2-layer board of 35 × 79 mm with 91 parts on 97 nets, routed with 1,000 tracks and 292 vias.
It is built around the AMS1117-3.3, REF3033AIDBZR and SS8050. Its parts include 25 resistors, 24 capacitors, 10 connectors, 9 diodes and 5 ICs. It belongs with the STM32 boards of this library.
Main components
3AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsREF3033AIDBZR
SOT-23-40℃~+125℃@(Ta) 105uVrms 25mA 3.35V~5.5V 3.3V 36uVp-p 50uA 75ppm/℃ Fixed Series ±0.2% SOT-23 Voltage Reference ROHSTexas InstrumentsVoltage ReferenceSS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdG431_S_V1
STM32G431C8T6 system board, temporarily designed for the 2024 Electronic Design Competition.
Bug_0722:
- Package_error
The pins 1 and 2 of the transistor package have an unknown error on the actual PCB, requiring the transistor to be soldered upside down.
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R9, R14, R15, R17, R20, R22, R23, R24, R25, R26 |
| 8 | 100nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C7, C9, C11, C14, C15, C16, C17 |
| 6 | 100pf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C13, C18, C19, C20, C21 |
| 5 | 4.7uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C6, C8, C10 |
| 5 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D5, D6, D8, D10 |
| 5 | SW_Push | Main:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1, SW2, SW3, SW4, SW5 |
| 4 | , , , | ||
| 4 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R18, R21, R27 |
| 4 | 22pf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C22, C23 |
| 4 | Conn_Coaxial | Connector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J4, J5, J6, J7 |
| 3 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R6 |
| 2 | 1N4007 | Diode_SMD:D_SMA_Handsoldering | D2, D3 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 2 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2, U3 |
| 2 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J9, J10 |
| 2 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1, Y2 |
| 2 | FerriteBead_Small | Fuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19 |
| 1 | 36k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 470nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J2 |
| 1 | D | Diode_SMD:D_SMA_Handsoldering | D11 |
| 1 | LOGO | xgd | G*** |
| 1 | LOGO | LOGO | G*** |
| 1 | REF3033AIDBZR | Main:SOT-23_Handsoldering | U5 |
| 1 | SS8050 | Main:SOT-23_Handsoldering | Q1 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | STM32G431C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | TVS | Diode_SMD:D_SMA_Handsoldering | D9 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
The 89 most common of 91 parts.
Similar boards
- 4 layers100 × 68 mm

- 4 layers140 × 70 mm

- 6 layers34.4 × 20 mm

GigaControl
kaminaris/GigaESC-ControlBoard
Compact six-layer control card for modular GigaESC motor controllers. The MCU, CAN transceiver, IMU and signal conditioning live here; the MOSFET power stage and power supply are separate boards.
54 parts - 4 layers75.1 × 60 mm

STM32F1 FEDEVEL
NasserTaqi/STM32F1_Mixed_Signal_PCB
A mixed-signal PCB utilizing an STM32F1 for audioband-frequency signal analyzer and and signal generator.
116 parts - 4 layers47.9 × 78.2 mm

Backbone lab placement review
andreapiccini/spaghettilab-community
SpaghettiLab is an open modular hardware and software ecosystem for rapid prototyping, embedded systems development, and product innovation.
207 parts10 - 4 layers243.8 × 171.5 mm

- 4 layers75.2 × 99.5 mm

FOC
nordstream3/FOC
Date | Manufacturer | amount | includes | shipping & tax | price | -------- | -------- | -------- | -------- | -------- | -------- | 2024-01-17 | JLCPCB | 10 boards | All assembled excl fets and caps | YES, to EU |…
261 parts81 - 2 layers90.2 × 90 mm

Sra dev board 2026
SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications
219 parts81MIT
Questions
How big is the STM32G431C8T6 PCB?
It measures 35 × 79 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32G431C8T6 use?
91 parts, built around the AMS1117-3.3, REF3033AIDBZR and SS8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32G431C8T6 KiCad files?
From the BypassCapacitor/G431_S_V1 repository on GitHub, at the commit this page was made from: the board is STM32G431C8T6/STM32G431C8T6.kicad_pcb and its schematic STM32G431C8T6/Arduino_extension_connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32G431C8T6 design in my own project?
Its repository states no licence, so its author keeps all rights: ask BypassCapacitor before reusing the design.