
PVDX BatteryBoard
BrownSpaceEngineering/PVDX-Battery-Board
Battery subsystem board for PVDX — connects the battery stack, solar cells/solar PCB, heaters, and thermistors.

Battery subsystem board for PVDX — connects the battery stack, solar cells/solar PCB, heaters, and thermistors.
PVDX Battery Board is an open-source printed circuit board by BrownSpaceEngineering, from the BrownSpaceEngineering/PVDX-Battery-Board repository on GitHub. It is a 2-layer board of 75.7 × 115 mm with 88 parts on 67 nets, routed with 473 tracks and 111 vias.
It is built around the S-8252ABY-M6T1U, RSX301LAM30TR and GA10K3A1IA, with the DMC2053UVT among its other parts. Its parts include 12 connectors, 10 resistors, 4 ICs, 4 diodes and 4 fuses. It belongs with the power boards of this library.
Battery subsystem board for PVDX — connects the battery stack, solar cells/solar PCB, heaters, and thermistors.
The Battery Board is primarily structural/routing rather than active. It has no onboard charging or regulation ICs (that logic lives on EPS). Its job is to tie the battery stack into the rest of the power subsystem: routing to the regular (non-perovskite) solar cells and solar PCB, driving the battery heaters, and carrying thermistor signals back for battery temperature monitoring.
Board sheets:
PVDX-Battery-Board/
├── PVDX-Battery-Board.kicad_pro / .kicad_sch / .kicad_pcb
├── fp-lib-table
├── schematics/
│ ├── heater.kicad_sch
│ └── connectors.kicad_sch
├── libs/
│ ├── footprints.pretty/
│ ├── symbols/
│ └── 3d_models/
└── manufacturing/
└── rev-<N>_<date>/
├── gerbers/
├── bom/
└── plots/Why hardwire instead of connectors: simplifies the harness at the battery/heater interface and removes a failure point (connector) from a joint that doesn't need to be serviceable in flight. KiCad has no dedicated "exclude from STEP" option, so per-footprint 3D model visibility is the mechanism used to keep the pad pattern without the connector body in mechanical exports.
libs/footprints.pretty/. The original vendor export had a stray space in the filename — fixed during the repo reorg.PVDX_BatteryBoard_Board.kicad_sch was an orphaned, blank sheet not referenced anywhere in the hierarchy — deleted during the reorg.| Rev | Date | Notes | Location |
|---|---|---|---|
| 1.1 | 8/22/26 | Current gerber set | manufacturing/rev-1.1_2026-08-22/ |
manufacturing/rev-1.1_2026-08-22/bom/ currently empty)| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C_BP1, C_BP2, C_BP3, C_BP4, C_BP5, C_BP6, C_BP7, C_BP8, C1, C2, C3, C4 |
| 8 | 470R | Resistor_SMD:R_0603_1608Metric | R_BP1, R_BP2, R_BP5, R_BP6, R_BP8, R_BP9, R_BP11, R_BP12 |
| 8 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4, J5, J6, J7, J8, J9, J10, J11 |
| 8 | SI4136DY-T1-GE3 | footprints:SOIC127P600X175-8N | Q_BP1, Q_BP2, Q_BP3, Q_BP4, Q_BP5, Q_BP6, Q_BP7, Q_BP8 |
| 8 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R6, R7, R10 |
| 4 | 11k | Resistor_SMD:R_0603_1608Metric | Rt1, Rt3, Rt5, Rt7 |
| 4 | 2k | Resistor_SMD:R_0603_1608Metric | R_BP3, R_BP4, R_BP7, R_BP10 |
| 4 | 3.9k | Resistor_SMD:R_0603_1608Metric | Rt2, Rt4, Rt6, Rt8 |
| 4 | 3410.0141.01 | Fuse:Fuse_1206_3216Metric | F1, F2, F3, F4 |
| 4 | D_Schottky | Diode_SMD:D_SOD-128 | D1, D2, D3, D4 |
| 4 | GA10K3A1IA | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | TH1, TH2, TH3, TH4 |
| 4 | Heater | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | R3, R5, R8, R9 |
| 4 | S-8252ABY-M6T1U | footprints:SOT236-A-PKG_MP006-A-P-SD-2.1_ABY | U1, U2, U3, U4 |
| 2 | DMC2053UVT | Package_TO_SOT_SMD:TSOT-23-6 | Q1, Q2 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | Conn_01x19 | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J1 |

BrownSpaceEngineering/PVDX-Battery-Board
Battery subsystem board for PVDX — connects the battery stack, solar cells/solar PCB, heaters, and thermistors.

BrownSpaceEngineering/PVDX-EPS_V1
Avionics files related to new overhauled EPS schematics, pcb design, and documentation

OSHE-Github/OSHE-Framework
Refer to README.pdf for detailed instructions on how to use our devices.


Big-Red-Sat/Big-Red-Sat-1
This repository contains the designs for the Big Red Sat-1, a 1U CubeSat examining the performance of perovskite solar cells in low earth orbit.


c0pperdragon/C64-Video-Enhancement
Component video modification for the C64 8-bit computer


It measures 75.7 × 115 mm and has 2 copper layers, 1.6 mm thick.
88 parts, built around the S-8252ABY-M6T1U, RSX301LAM30TR, GA10K3A1IA and DMC2053UVT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BrownSpaceEngineering/PVDX-Battery-Board repository on GitHub, at the commit this page was made from: the board is PVDX-Battery-Board.kicad_pcb and its schematic PVDX-Battery-Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BrownSpaceEngineering before reusing the design.