Skip to the content
2 layers39.8 × 20.6 mmUSB Breakout with Reset, the printed circuit board in 3D

USB Breakout with Reset

BrownDogGadgets/CrazyCircuits131

PCB and design files for CrazyCircuits

Size
39.8 × 20.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
7
Pads
32
Tracks, vias
47, 2
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
10 Feb 2017
Updated
30 Jun 2026

Overview

USB Breakout with Reset is an open-source printed circuit board by BrownDogGadgets, from the BrownDogGadgets/CrazyCircuits repository on GitHub. It is a 2-layer board of 39.8 × 20.6 mm with 13 parts on 7 nets, routed with 47 tracks and 2 vias.

Its parts include 3 resistors, 2 diodes, 1 capacitor, 1 connector and 1 switch. It belongs with the interfaces and adapters boards of this library.

README

Circuit-Kits/Modules/1x3-Button-Momentary/README.md

1x3 Momentary Pushbutton Module v1.3

A Lego-compatible Crazy Circuits module.

This is a single momentary pushbutton module. It is normally open, so it only conducts between the two end pads when the button is pressed.

Bill of Materials

RefQtyDescriptionDigikey PN
SW11SWITCH MOMENT SPST-NO 0.05A 24V SMT B3F-1000SW400-ND

Manufacturing Notes

This board must be v-scored. Do not panelize with support tabs or mousebites.

Gerber Preview

Schematic

Parts

13
QtyValueFootprintReferences
5TEST_1PRewire_Circuits:STANDALONE-LEGO-HOLE-PLATEDW1, W2, W3, W4, W5
23.6VRewire_NonLego:DIODE-DO-41D1, D2
266.5Rewire_NonLego:RES-CARBONFILM-7MMR2, R3
11.5KRewire_NonLego:RES-CARBONFILM-7MMR1
11ufRewire_NonLego:CAP-DISC-D7.5MM-P5MMC1
1RESETRewire_NonLego:SWITCH-OMRON-MOMENTARY-TH-B3F-10XXSW1
1USB-MICRORewire_NonLego:CONN-USB-MICRO-B-AMPHENOL-10118193-0001LFJ1

More from BrownDogGadgets/CrazyCircuits

12
  • 2 layers41.8 × 34.2 mmLegoLED Button Battery, the printed circuit board in 3D

    LegoLED Button Battery

    BrownDogGadgets/CrazyCircuits

    PCB and design files for CrazyCircuits

    9 parts131
  • 2 layers41.8 × 41.7 mmLegoLED SMTButton Battery, the printed circuit board in 3D

    LegoLED SMTButton Battery

    BrownDogGadgets/CrazyCircuits

    PCB and design files for CrazyCircuits

    9 parts131
  • 2 layers47.8 × 79.8 mm6x10-Photon Breakout, the printed circuit board in 3D

    6x10-Photon Breakout

    BrownDogGadgets/CrazyCircuits

    PCB and design files for CrazyCircuits

    6 parts131
  • 2 layers47.8 × 87.8 mm6x11-NodeMCU V2-Breakout, the printed circuit board in 3D

    6x11-NodeMCU V2-Breakout

    BrownDogGadgets/CrazyCircuits

    PCB and design files for CrazyCircuits

    6 parts131
  • 2 layers15.6 × 15.6 mm2x2-USB Power Connector, the printed circuit board in 3D

    2x2-USB Power Connector

    BrownDogGadgets/CrazyCircuits

    PCB and design files for CrazyCircuits

    5 parts131
  • 2 layers23.6 × 15.6 mm2x3-USB Power Connector, the printed circuit board in 3D

    2x3-USB Power Connector

    BrownDogGadgets/CrazyCircuits

    PCB and design files for CrazyCircuits

    5 parts131
  • 2 layers23.5 × 15.6 mm2x3-Dark Detector, the printed circuit board in 3D

    2x3-Dark Detector

    BrownDogGadgets/CrazyCircuits

    PCB and design files for CrazyCircuits

    4 parts131

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the USB Breakout with Reset PCB?

It measures 39.8 × 20.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USB Breakout with Reset use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USB Breakout with Reset KiCad files?

From the BrownDogGadgets/CrazyCircuits repository on GitHub, at the commit this page was made from: the board is Circuit-Kits/Circuit-Kits/USB-Breakout-with-Reset/USB-Breakout-with-Reset.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the USB Breakout with Reset design in my own project?

Its repository states no licence, so its author keeps all rights: ask BrownDogGadgets before reusing the design.