4 layers88 × 94.5 mm
PROVES Cosmic Watch
BroncoSpace-Lab/CADENCE
A mono repo for the Cubesat Autonomous Detection and Enhanced Networked Collaboration Explorer(s)
53 parts
4 layers88 × 94.5 mm
Muon pcb
BroncoSpace-Lab/CADENCEA mono repo for the Cubesat Autonomous Detection and Enhanced Networked Collaboration Explorer(s)
- Size
- 88 × 94.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 76
- Pads
- 309
- Tracks, vias
- 474, 122
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Feb 2025
- Updated
- 8 Sep 2026
Overview
Muon pcb is an open-source printed circuit board by BroncoSpace-Lab, from the BroncoSpace-Lab/CADENCE repository on GitHub. It is a 4-layer board of 88 × 94.5 mm with 76 parts on 76 nets, routed with 474 tracks and 122 vias.
It is built around the RP2040, TMP1075DSG and W25Q128JVSIQ, with the ABM8-272-T3 and NSR0320MW2 among its other parts. Its parts include 24 capacitors, 16 resistors, 11 connectors, 7 ICs and 4 diodes. It belongs with the RP2040 boards of this library.
Main components
5
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
TMP1075DSG
SON8High Accuracy Temperature Sensor with I2C and SMBus Interface in Industry Standard LM75Texas InstrumentsUncategorised
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
NSR0320MW2
SOD-323-55℃~+125℃ 1 Independent 1A 20V 500mV@900mA 50uA@15V 5A SOD-323 Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdCADENCE-docs
A documentation repo for the Continuous Autonomous Detection Enabling Networked Collaboration Explorers of a Space Weather Anomaly Notification System (CADENCE - SWANS).
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C8, C9, C10, C11, C14 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R6, R7, R10, R11, R14 |
| 5 | TestPoint | 1my_footprints:TH_BD3.2-D2.0 | TP1, TP2, TP3, TP5, TP7 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C15, C22, C23, C24 |
| 3 | 470 | Resistor_SMD:R_0402_1005Metric | R15, R16, R17 |
| 3 | Conn_01x04 | 1my_footprints:JST_BM04B-SRSS-TB(LF)(SN) | J5, J7, J10 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C16, C20 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J1, J2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D3, D5 |
| 2 | MountingHole | H1, H2 | |
| 2 | SW_Push_Shielded | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW4, SW5 |
| 1 | 0.002 | Resistor_SMD:R_2512_6332Metric | R12 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 22u | Capacitor_SMD:C_1206_3216Metric | C25 |
| 1 | 3V | 1my_footprints:BAT-TH_BAT-HLD-001-THM_1 | BT1 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y3 |
| 1 | AZ1117-5.0 | 1my_footprints:AZ1117I-5.0 | U4 |
| 1 | BLM18BD601SN1J | 1my_footprints:BEADC1608X95N | FL1 |
| 1 | CD-PA1616D | 1my_footprints:CD-PA1616D | U1 |
| 1 | Conn_01x02 | 1my_footprints:HDR-TH_2P-P2.54-V-M | J6 |
| 1 | Conn_02x02_Top_Bottom | Connector_Hirose:Hirose_DF11-4DP-2DSA_2x02_P2.00mm_Vertical | J3 |
| 1 | Conn_02x06_Odd_Even | Connector_Hirose:Hirose_DF11-12DP-2DSA_2x06_P2.00mm_Vertical | J8 |
| 1 | INA219AxD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U13 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | 1my_footprints:cadence_cygnet_logo_placeholder | G*** |
| 1 | Micro_SD_Card_Det1 | 1my_footprints:microSD-503398-1892-1 | J4 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | NSR0320 | Diode_SMD:D_SOD-323F | D4 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U12 |
| 1 | SWD Port | Connector_PinHeader_1.27mm:PinHeader_2x02_P1.27mm_Vertical | J9 |
| 1 | TMP1075DSG | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U15 |
| 1 | USB_B_Micro | 1my_footprints:MICRO-USB-SMD_5P-P0.65-H-F_105164-0001 | J12 |
| 1 | W25Q128JVS | 1my_footprints:SOIC_208MIL_WIN | U3 |
More from BroncoSpace-Lab/CADENCE
2- 2 layers
Varadis RADFETs
BroncoSpace-Lab/CADENCE
A mono repo for the Cubesat Autonomous Detection and Enhanced Networked Collaboration Explorer(s)
4 parts
Similar boards
- 2 layers39.1 × 26.9 mm
Taranium RP2040
Taran-the-Idiot/Taranium-RP2040
An RP2040 devboard that is made to be compact and have its pins horizontally rather than vertically so it can have better packaging for my projects.
39 partsMIT - 4 layers277.2 × 107.5 mm
Katia
ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design
230 parts33CERN-OHL-P-2.0 - 4 layers51.8 × 20 mm
Sample target
alvarop/swd2usbc
Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!
57 parts29CC0-1.0 - 4 layers61.8 × 79.6 mm
- 4 layers40 × 58.5 mm
- 2 layers174 × 111 mm
Pedalboard hw
pedalboard/pedalboard-hw
pedalboard audio midi processor open hardware
169 parts14CERN-OHL-P-2.0 - 2 layers110 × 52 mm
- 2 layers62 × 47 mm
Questions
How big is the Muon pcb PCB?
It measures 88 × 94.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Muon pcb use?
76 parts, built around the RP2040, TMP1075DSG, W25Q128JVSIQ and ABM8-272-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Muon pcb KiCad files?
From the BroncoSpace-Lab/CADENCE repository on GitHub, at the commit this page was made from: the board is hardware/muon_pcb/muon_pcb.kicad_pcb and its schematic hardware/PROVES_Cosmic_Watch/PROVES_Cosmic_Watch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Muon pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask BroncoSpace-Lab before reusing the design.