
Z88 Mechanical Keyboard
BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)
ZX81 RAM Upgrade is an open-source printed circuit board by BrettHallen, from the BrettHallen/Sinclair repository on GitHub. It is a 2-layer board of 24.8 × 36.8 mm with 3 parts on 30 nets, routed with 55 tracks and 0 vias.
Its parts include 2 connectors and 1 IC.
The Cambridge Computers Z88 has a DE9 serial port with the following pinout:
| DE9 Pin | Signal | Purpose | DB25 Pin |
|---|---|---|---|
| 1 | +5V | do not use | n/c |
| 2 | TxD | transmitted data | 2 |
| 3 | RxD | received data | 3 |
| 4 | RTS | request to send | 4 |
| 5 | CTS | clear to send | 5 |
| 6 | unknown | do not use | n/c |
| 7 | GND | signal ground | 7 |
| 8 | DCD | data carrier detect | 6 & 8 |
| 9 | DTR | data terminal ready | 20 |
To connect to a device with a DB25 plug we need to through-connect the DE9 pins to the equivalent on the DB25 side. Additionally, we need to connect DB25 pin 6 (DSR, data set ready) to the DCD signal.
Note that DB25 pin 1 is Protective Ground (PG) and must not be connected to signal ground.
Z88 side: DE9 male
DB25 side: DB25 female

| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 32KB SRAM | Package_DIP:DIP-28_W15.24mm | U1 |
| 1 | Address Expansion | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | ZX81 RAM Socket | Package_DIP:DIP-28_W15.24mm_Socket | J2 |

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)
BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)

BrettHallen/Sinclair
Projects for Sinclair computers (ZX80, ZX81, TS1000, TS1500, TS2068, Spectrum and clones)


hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️




hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
It measures 24.8 × 36.8 mm and has 2 copper layers, 1.6 mm thick.
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BrettHallen/Sinclair repository on GitHub, at the commit this page was made from: the board is ZX81_RAM_Upgrade/ZX81_RAM_Upgrade.kicad_pcb and its schematic VDriveZ88_Serial_Converter/SurfaceMount/VDriveZ88_Serial_Converter_SMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BrettHallen before reusing the design.