Skip to the content
2 layersJR-200 SD, the printed circuit board in 3D

Information about National/Panasonic computers.

Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
83
Pads
248
Tracks, vias
447, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Jun 2026
Updated
28 Jun 2026

Overview

JR-200 SD is an open-source printed circuit board by BrettHallen, from the BrettHallen/National_Panasonic repository on GitHub. It is a 2-layer board with 15 parts on 83 nets, routed with 447 tracks and 0 vias.

It is built around the ATMEGA328-PU. Its parts include 7 capacitors, 4 ICs, 3 connectors and 1 crystal. It belongs with the AVR (ATmega, ATtiny) and FPGA and CPLD boards of this library.

Main components

1

README

README.md

National/Panasonic

Information about National/Panasonic computers.

National JR-200

National CF-3000

The MSX1 compatible computer.

Machines in the range:

  • National CF-2000 (all-in-one)
  • National CF-2601 (Superimposition Unit)
  • National CF-3000 (separate keyboard)
  • National CF-3300 (with additional 3.5" floppy drive)

Parts

15
QtyValueFootprintReferences
4100nFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC4, C5, C6, C7
222pFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC1, C2
2JR-200 Expansion BusConnector_PinHeader_2.54mm:PinHeader_2x25_P2.54mm_VerticalJ2, J3
1100µFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC3
116MHzCrystal:Crystal_HC49-U_VerticalY1
127C64Package_DIP:DIP-28_W15.24mmU1
16821Package_DIP:DIP-40_W15.24mm_LongPadsU2
1ATF22V10Package_DIP:DIP-24_W7.62mmU4
1ATmega328-PPackage_DIP:DIP-28_W7.62mmU3
1Adafruit MicroSD BreakoutClueless_Engineer:Adafruit MicroSD BreakoutJ1

More from BrettHallen/National_Panasonic

1
  • 2 layers43.9 × 44.2 mmJR-200 DIN to VGA, the printed circuit board in 3D

    JR-200 DIN to VGA

    BrettHallen/National_Panasonic

    Information about National/Panasonic computers.

    3 parts1

Similar boards

  • 2 layers104.9 × 75.2 mmHandipi kb, the printed circuit board in 3D

    Handipi kb

    brickbots/HandiPi

    Handheld RPI4 based computer with keyboard and display

    95 parts814MIT
  • 2 layers228 × 98 mmPlaid, the printed circuit board in 3D

    Plaid

    hsgw/plaid

    12x4 ortholinear usb keyboard made by Through Hole components ONLY.

    139 parts779MIT
  • 2 layers94.6 × 46.1 mmHeaterMeterPI, the printed circuit board in 3D

    HeaterMeterPI

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    66 parts557MIT
  • 2 layers50 × 50 mmAvrcraft poed, the printed circuit board in 3D

    Avrcraft poed

    cnlohr/avrcraft

    Minecraft server optimized for 8-bit devices.

    58 parts471
  • 2 layers284.7 × 94.2 mmLumberjack, the printed circuit board in 3D

    Lumberjack

    peej/lumberjack-keyboard

    5x12 ortholinear through-hole component keyboard PCB for standard 60% cases

    165 parts403MIT
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers63.3 × 57.2 mmRam Tester, the printed circuit board in 3D

    Ram Tester

    tops4u/Ram-Tester

    Ram Tester for vintage CBM Computer RAM Chips

    42 parts118
  • 2 layers285 × 117 mmTartan, the printed circuit board in 3D

    Tartan

    hsgw/tartan

    60% keyboard made by through-hole parts only

    171 parts98

Questions

What parts does the JR-200 SD use?

15 parts, built around the ATMEGA328-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the JR-200 SD KiCad files?

From the BrettHallen/National_Panasonic repository on GitHub, at the commit this page was made from: the board is National_JR-200/JR-200_SD/JR-200_SD.kicad_pcb and its schematic National_JR-200/JR-200_DIN-to-VGA/JR-200_DIN-to-VGA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the JR-200 SD design in my own project?

Its repository states no licence, so its author keeps all rights: ask BrettHallen before reusing the design.