
Numpad project
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Hardware projects for the Nafanya ZX Spectrum Clone
Nafanya Keyboard is an open-source printed circuit board by BrettHallen, from the BrettHallen/Nafanya repository on GitHub. It is a 2-layer board of 193 × 102.3 mm with 64 parts on 18 nets, routed with 315 tracks and 3 vias.
Its parts include 41 switches, 9 resistors, 4 connectors and 1 diode. It belongs with the keyboards and input and retro computing and games boards of this library.
The Нафаня is a late Soviet-era (1991) ZX Spectrum clone out of the Russian SFSR.
My Нафаня is serial no. 00872.

My particular example has a nice, ceramic Z80 from DDR (East Germany) as well as a ceramic БМК (Basic Matrix Crystal, Soviet version of a ULA or Gate Array).
It looked like the original, good quality capacitors were removed from my machine due to their precious-metal content. They were substituted with poor quality replacements. I, in turn, replaced them with better quality ones ... this greatly stabilised the RGB video output! I also added a lot more decoupling capacitors - there was provision for them on the board but they were not installed.

My YouTube videos:
The ROM from my machine can be found in this repository.
It has a pretty cool boot screen - I assume this is depicting the character "Нафаня" the computer is named after, a домовой (domovoy, or house spirit) from the Soviet animated film series "Домовёнок Кузя" (Domovyonok Kuzya, or "Kuzya the Little Domovoy") which is based on a children's book by Tatiana Aleksandrova.

The keyboard is not terribly good. Here is a re-designed one using tactile switches that should fit in the existing case.

6-Apr-2025: Still being finalised. The switch positions are slightly off as you go from left to right. 17-Apr-2025: Finalised switch layout, sent for test fabrication.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10KΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5, R6, R7, R8, R9 |
| 6 | PCB | MountingHole:MountingHole_3.2mm_M3 | H2, H3, H4, H5, H6, H7 |
| 2 | Speaker | MountingHole:MountingHole_3.2mm_M3 | H1, H8 |
| 1 | 0 | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW10 |
| 1 | 1 | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW1 |
| 1 | 2 | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW2 |
| 1 | 3 | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW3 |
| 1 | 300Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 4 | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW4 |
| 1 | 5 | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW5 |
| 1 | 6 | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW6 |
| 1 | 7 | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW7 |
| 1 | 8 | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW8 |
| 1 | 9 | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW9 |
| 1 | A | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW21 |
| 1 | B | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW36 |
| 1 | BREAK_SPACE | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW40 |
| 1 | C | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW34 |
| 1 | CAPS_SHIFT | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW31 |
| 1 | Columns | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J2 |
| 1 | D | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW23 |
| 1 | E | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW13 |
| 1 | ENTER | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW30 |
| 1 | F | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW24 |
| 1 | Faceplate GND | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J4 |
| 1 | G | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW25 |
| 1 | H | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW26 |
| 1 | I | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW18 |
| 1 | J | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW27 |
| 1 | K | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW28 |
| 1 | L | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW29 |
| 1 | M | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW38 |
| 1 | N | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW37 |
| 1 | O | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW19 |
| 1 | P | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW20 |
| 1 | POWER | LED_THT:LED_D5.0mm | D1 |
| 1 | Q | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW11 |
| 1 | R | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW14 |
| 1 | RESET/СБРОС | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW41 |
| 1 | Rows | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J3 |
| 1 | S | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW22 |
| 1 | SYMBOL_SHIFT | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW39 |
| 1 | Speaker | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | Speaker/Reset/Power | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J1 |
| 1 | T | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW15 |
| 1 | U | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW17 |
| 1 | V | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW35 |
| 1 | W | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW12 |
| 1 | X | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW33 |
| 1 | Y | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW16 |
| 1 | Z | Button_Switch_THT:SW_PUSH_6mm_H8.5mm | SW32 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350



PyrooL/Alpha
A 28-key semi-ortholinear mechanical keyboard designed by PyroL

ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

It measures 193 × 102.3 mm and has 2 copper layers, 1.6 mm thick.
64 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BrettHallen/Nafanya repository on GitHub, at the commit this page was made from: the board is Nafanya_Keyboard/Nafanya_Keyboard.kicad_pcb and its schematic Nafanya_Keyboard/Nafanya_Keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BrettHallen before reusing the design.