2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
2 layers34.3 × 31.1 mm
This is a simple adapter board for the ESP8266 to plug into the Ramps 1.4. When coupled with ESP3D or other firmware this board will provide a wifi to serial connection for 3D printers
- Size
- 34.3 × 31.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 6
- Pads
- 30
- Tracks, vias
- 49, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Dec 2017
- Updated
- 3 Dec 2017
Overview
Esp3d is an open-source printed circuit board by Brandon2255p, from the Brandon2255p/ESP3D-Ramps-Board repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 34.3 × 31.1 mm with 6 parts on 6 nets, routed with 49 tracks and 0 vias.
It is built around the ESP-12E and LM1117-3.3. Its parts include 2 ICs, 1 capacitor and 1 resistor. It belongs with the radio and wireless and interfaces and adapters boards and the ESP8266 boards of this library.
Main components
2
ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
README
README.mdESP3D-Ramps-Board
This is a simple adapter board for the ESP8266 to plug into the Ramps 1.4. When coupled with ESP3D or other firmware this board will provide a wifi to serial connection for 3D printers
This board is designed for the ESP8266-12E, ESP8266-12F, ESP8266-12S models.
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | RAMPS1 | |
| 1 | 100nF' | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | ESP-12E | ESP8266:ESP-12S_SMD | U2 |
| 1 | Jumper | Resistors_Universal:Resistor_SMDuniversal_0805to2512_HandSoldering | JP1 |
| 1 | LM1117-3.3 | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | R | Resistors_SMD:R_0805_HandSoldering | R1 |
Similar boards
- 2 layers43 × 34.3 mm
- 2 layers47 × 37.5 mm
- 2 layers60 × 40 mm
Forcegauge
szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,
77 parts18GPL-3.0 - 4 layers110 × 55 mm
- 2 layers147.3 × 95.3 mm
Nixie proj conflict-20171112-163801
dm2lct/tlnixie
PCB files for the Turmlabor nixie clock 2.0
117 parts11GPL-3.0 - 2 layers140 × 72.5 mm
Nixie proj
dm2lct/Nixieclock_kit
This is a Nixie-clock controlled by a ESP8266 module with NTP and MQTT support.
119 parts9GPL-3.0 - 4 layers45 × 89 mm
Questions
How big is the Esp3d PCB?
It measures 34.3 × 31.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp3d use?
6 parts, built around the ESP-12E and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp3d KiCad files?
From the Brandon2255p/ESP3D-Ramps-Board repository on GitHub, at the commit this page was made from: the board is esp3d.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp3d design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).