Skip to the content
2 layers27.8 × 9.5 mmKeithley TF70, the printed circuit board in 3D

A drop-in replacement PCB for the Keithley TF-70 resistor network found in Keithley 172A and 173A multimeters.

Size
27.8 × 9.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
11
Pads
26
Tracks, vias
29, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
1 Oct 2023
Updated
11 Oct 2023

Overview

Keithley TF70 is an open-source printed circuit board by Bocuma747, from the Bocuma747/Keithley_TF70 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 27.8 × 9.5 mm with 9 parts on 11 nets, routed with 29 tracks and 0 vias.

Its parts include 8 resistors and 1 connector. It belongs with the sensors and measurement boards of this library.

README

README.md

Keithley_TF70

A drop-in replacement PCB for the Keithley TF-70 resistor network found in Keithley 172A and 173A multimeters. This is R615 in Rev B instruments, as found in the A/D converter section of the service manual.

Bill of materials is located in BOM.csv. For maximum performance, I recommend 0.1% tolerance resistors with the lowest temperature coefficient available. The header pins are generic right-angle header pins with 0.1" (2.54mm) pitch, the same as on breadboards.

The PCB can be ordered from any of the usual PCB fabs by uploading Gerber.zip. No special requirements should be necessary.

Original resistor network, exposed and labeled to show the inner resistors and pin numbers:

Original resistor network

Schematic:

Schematic

Replacement:

Replacement PCB

PCB_installed

Parts

9
QtyValueFootprintReferences
27.5kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R3
111.3kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7
115kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8
12.8kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5
1330Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
139kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
14.87kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6
1Conn_01x10_PinConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ1

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the Keithley TF70 PCB?

It measures 27.8 × 9.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Keithley TF70 use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keithley TF70 KiCad files?

From the Bocuma747/Keithley_TF70 repository on GitHub, at the commit this page was made from: the board is Keithley_TF70.kicad_pcb and its schematic Keithley_TF70.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keithley TF70 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).