
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A USB-C powered light-up PCB keychain shaped like a chunky lightning bolt. Plug it into a USB-C charger, power bank, or powered port and the amber LEDs light the bolt.
Pocket console keychain is an open-source printed circuit board by Billdesj, from the Billdesj/lightning-bolt-keychain repository on GitHub, published under the MIT licence. It is a 2-layer board of 46 × 78 mm with 15 parts on 10 nets, routed with 39 tracks and 5 vias.
Its parts include 5 resistors, 5 diodes, 1 connector and 1 fuse.
A USB-C powered light-up PCB keychain shaped like a chunky lightning bolt. Plug it into a USB-C charger, power bank, or powered port and the amber LEDs light the bolt.
USB-C VBUS -> F1 polyfuse -> VLED
CC1 -> 5.1k -> GND
CC2 -> 5.1k -> GND
VLED -> 1k resistor -> amber LED -> GND (five branches)The board is intentionally power-only. It does not route USB data. The CC pull-down resistors are what make a USB-C source provide default 5 V to the board.
hardware/lightning-bolt-keychain.kicad_pro - KiCad project filehardware/lightning-bolt-keychain.kicad_sch - USB-C powered schematichardware/lightning-bolt-keychain.kicad_pcb - lightning-bolt PCB layoutbom/lightning-bolt-keychain-bom.csv - parts listfabrication/fab-notes.md - PCB fab and assembly notesfabrication/lightning-bolt-keychain-fab-package.zip - Gerber, drill, BOM, and validation reportsGCT USB4125 family.RCC1 and RCC2; these are required for USB-C power input.fabrication/fabrication/lightning-bolt-keychain-fab-package.zip to a PCB fab for quotingRecommended finish:
Keep the bolt chunky. Thin points look cool in renders but keychains get abused.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 5 | Amber | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | RCC1, RCC2 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | Keyring | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H1 |
| 1 | USB-C Power | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk

It measures 46 × 78 mm and has 2 copper layers, 1.6 mm thick.
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Billdesj/lightning-bolt-keychain repository on GitHub, at the commit this page was made from: the board is hardware/pocket-console-keychain.kicad_pcb and its schematic hardware/lightning-bolt-keychain.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).