
Smart fan
ben-willis/smart-fan
ESP32-S3 smart fan retrofit with custom KiCad hardware and ESPHome firmware. Wi-Fi + Home Assistant control, OTA updates, and UART protocol support for upgrading legacy fan controllers.

A finished prototype companion board.
RTK GPS V2 is an open-source printed circuit board by Besix2, from the Besix2/Flight-Controller-companion-board repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 36 × 36 mm with 41 parts on 62 nets, routed with 645 tracks and 95 vias.
It is built around the ESP32-S3-MINI-1U-N8, AP7361C-33E and SS14, with the WS2812B among its other parts. Its parts include 12 capacitors, 6 diodes, 5 resistors, 5 connectors and 4 ICs. It belongs with the radio and wireless boards and the ESP32 boards of this library.
A finished prototype I made to bridge gps/compass connectivity from gps module(datagnss gem1305) via jst plug to the flight controller (mainly designed around dakefpv f405 flight controller but would work with every standard fc). It also uses a esp32 to receive RTCM messages over espnow and also has a camera connector at the bottom to add april tag support using the esp32. I never physically made this prototype as I skipped it in favor of developing my own flight controller.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_4mm | H1, H2, H3, H4 |
| 3 | 10µF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4 |
| 3 | SS14 | Diode_SMD:D_SOD-323 | D4, D5, D6 |
| 2 | 0.3KΩ | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C5 |
| 2 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10 |
| 2 | 1µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12 |
| 2 | 5,1 kΩ | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | Conn_01x06 | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J3, J4 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2 |
| 1 | 0.1µF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 10Ω | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | AP7361C-33E | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | Conn_01x24_Pin | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J5 |
| 1 | ESP32-S3-MINI-1U | PCM_Espressif:ESP32-S3-MINI-1U | U1 |
| 1 | MCP1700x-120xxTT | Package_TO_SOT_SMD:SOT-23 | U4 |
| 1 | MCP1700x-280xxTT | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_Shouhan_MSK12C02 | SW3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | WS2812B | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D3 |

ben-willis/smart-fan
ESP32-S3 smart fan retrofit with custom KiCad hardware and ESPHome firmware. Wi-Fi + Home Assistant control, OTA updates, and UART protocol support for upgrading legacy fan controllers.

DevKiDCosmo/SATELLITE-EDGE-MODULE
A satellite edge module ready for competition






It measures 36 × 36 mm and has 4 copper layers, 1.6 mm thick.
41 parts, built around the ESP32-S3-MINI-1U-N8, AP7361C-33E, SS14 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Besix2/Flight-Controller-companion-board repository on GitHub, at the commit this page was made from: the board is RTK_GPS_V2.kicad_pcb and its schematic RTK_GPS_V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).