
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A pocket-sized musical instrument
Touch kicad template is an open-source printed circuit board by BenjaminPoilve, from the BenjaminPoilve/minichord repository on GitHub. It is a 2-layer board of 32 × 76 mm with 14 parts on 12 nets, routed with 34 tracks and 12 vias.
This repository contains the source file both for the minichord itself and its documentation.
To discuss the state of the project, features or share music, please head to the minichord forum.
The best way to get to know this project is to visit the minichord website which contains the documentation of the project.
In particular it contains:
This documentation is build with mkdocs and the relevant source and build script is available in the documentation folder.
The hardware folder contains the necessary ressources to build a minichord.
All hardware is provided under a Creative Commons Attribution-NonCommercial 4.0 International Public License (CC BY-NC 4.0).
In particular it contains:
The firmware folder contains the project firmware and necessary programming ressources.
All software is provided under a 3-clause BSD License.
In particular it contains:
Minichord users have developed some very cool alternative platforms that interface with the minichord.
Make sure to test them as they offer many alternative features!
Here is a list of available media related to the project (to be completed) :
For any information about the project, don't hesitate to write at info@minichord.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Conn_01x01_Male | Personnal_Library:rond_touch_zone | T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T11, T12 |
| 2 | Conn_02x03_Top_Bottom | Personnal_Library:PinHeader_2x03_P2.54mm_Vertical_SMD | J1, J2 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 32 × 76 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BenjaminPoilve/minichord repository on GitHub, at the commit this page was made from: the board is hardware/PCB/touch zones/touch kicad template/touch kicad template.kicad_pcb and its schematic hardware/PCB/touch zones/touch kicad template/touch kicad template.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BenjaminPoilve before reusing the design.