
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

Repository containing files used in my 2024-2025 TWST Rain Cover Project
TWSTArd 0.2.4 is an open-source printed circuit board by BaiMySelf, from the BaiMySelf/TWST repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 22 parts on 58 nets, routed with 140 tracks and 0 vias.
Its parts include 6 resistors, 6 switches, 3 diodes, 3 transistors and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R4, R9 |
| 3 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3, R8 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D2, D3 |
| 3 | NPN | TWST:2N3904 | Q1, Q2, Q3 |
| 3 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1, J2, J3 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A2 |
| 1 | HeatRelay | Relay_THT:Relay_DPDT_Schrack-RT2-FormC_RM5mm | K2 |
| 1 | Heat_Butt | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW2 |
| 1 | SpeedRelay | Relay_THT:Relay_DPDT_Schrack-RT2-FormC_RM5mm | K3 |
| 1 | Speed_Butt | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | ToggleRelay | Relay_THT:Relay_DPDT_Schrack-RT2-FormC_RM5mm | K1 |
| 1 | Toggle_Butt | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW3 |

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BaiMySelf/TWST repository on GitHub, at the commit this page was made from: the board is TWST/TWSTArd_0.2.4/TWSTArd_0.2.4.kicad_pcb and its schematic TWST/TWSTArd_0.2.4/TWSTArd_0.2.4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).