
Synclap
Bad-Dog-Designs/Ospray-8
KiCad project files for the Ospray-8 Percussion synth

KiCad project files for the Ospray-8 Percussion synth
Synbal is an open-source printed circuit board by Bad-Dog-Designs, from the Bad-Dog-Designs/Ospray-8 repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 71 × 108 mm with 112 parts on 84 nets, routed with 979 tracks and 66 vias.
It is built around the LM13700M and LM324. Its parts include 50 resistors, 22 capacitors, 11 connectors, 6 ICs and 3 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100k | Resistor_SMD:R_1206_3216Metric | R3, R10, R11, R13, R31, R34, R35, R50 |
| 7 | 10k | Resistor_SMD:R_1206_3216Metric | R9, R18, R19, R20, R22, R25, R29 |
| 7 | 10n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C3, C4, C5, C6, C7, C8, C14 |
| 7 | 1k | Resistor_SMD:R_1206_3216Metric | R28, R30, R36, R40, R42, R43, R47 |
| 5 | 22k | Resistor_SMD:R_1206_3216Metric | R26, R32, R33, R37, R41 |
| 5 | 47k | Resistor_SMD:R_1206_3216Metric | R1, R2, R14, R15, R21 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C21, C22, C23, C24 |
| 4 | 4k7 | Resistor_SMD:R_1206_3216Metric | R12, R23, R39, R44 |
| 4 | 68k | Resistor_SMD:R_1206_3216Metric | R45, R46, R48, R49 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 4 | TestPoint | TestPoint:TestPoint_Keystone_5010-5014_Multipurpose | +6v, Gnd, Noise, RM |
| 3 | SMT Pads | Bdd_User:Bus Connector | J1, J10, J11 |
| 2 | 100n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C11, C12 |
| 2 | 1N4148 | Diode_SMD:D_MiniMELF | D1, D3 |
| 2 | 1n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C16, C17 |
| 2 | 1uF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C15, C18 |
| 2 | 220k | Resistor_SMD:R_1206_3216Metric | R4, R38 |
| 2 | 2M2 | Resistor_SMD:R_1206_3216Metric | R17, R27 |
| 2 | 4u7 | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C2, C9 |
| 2 | LM13700 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5, U6 |
| 1 | 150k | Resistor_SMD:R_1206_3216Metric | R16 |
| 1 | 220uf | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 22nF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C10 |
| 1 | 2SC828 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | 2u2 | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C13 |
| 1 | 330k | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | 390k | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 40106 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U2 |
| 1 | 4070 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U3 |
| 1 | 470k | Resistor_SMD:R_1206_3216Metric | R7 |
| 1 | 560k | Resistor_SMD:R_1206_3216Metric | R8 |
| 1 | 680R | Resistor_SMD:R_1206_3216Metric | R24 |
| 1 | Audio In | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J6 |
| 1 | Audio Out | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J7 |
| 1 | Decay 1M | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV4 |
| 1 | Filter | Bdd_User:1P3WSW | SW2 |
| 1 | Frequency 10k | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV7 |
| 1 | LED | LED_THT:LED_D3.0mm | D2 |
| 1 | LM324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | LM741 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Manual | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | Mix 100k | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV3 |
| 1 | Mono Out | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J3 |
| 1 | Pan 100k | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV9 |
| 1 | Power In | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | Power Out | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J5 |
| 1 | Remote Trig | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Resonance 470k | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV5 |
| 1 | SMT pads | Bdd_User:Bus Connector | J9 |
| 1 | Sensitivity 47k | Potentiometer_THT:Potentiometer_Piher_PT-6-V_Vertical | RV2 |
| 1 | Sweep 10k | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV6 |
| 1 | Trigger | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J2 |
| 1 | Tune 10k | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV1 |
| 1 | Volume 47k | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV8 |

Bad-Dog-Designs/Ospray-8
KiCad project files for the Ospray-8 Percussion synth

Bad-Dog-Designs/Ospray-8
KiCad project files for the Ospray-8 Percussion synth

Bad-Dog-Designs/Ospray-8
KiCad project files for the Ospray-8 Percussion synth

Bad-Dog-Designs/Ospray-8
KiCad project files for the Ospray-8 Percussion synth




mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules


clacktronics/EuroClack_BYOM_Modules
In this repository is all the modules in the book for Build Your Own Modular the Clacktronics ring binder product to build your own modular synthesizer from scratch. clacktronics.co.uk/byom/.


gligli/overcycler
Affordable DIY polyphonic hybrid single cycle / analog synthesizer
It measures 71 × 108 mm and has 2 copper layers, 1.6 mm thick.
112 parts, built around the LM13700M and LM324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Bad-Dog-Designs/Ospray-8 repository on GitHub, at the commit this page was made from: the board is Synbal/Synbal.kicad_pcb and its schematic Synbal/Synbal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).