
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

Github Pages for the BYU-I e-Badge Project
I2c flash minibadge is an open-source printed circuit board by BYU-I-eBadge, from the BYU-I-eBadge/byu-i-ebadge.github.io repository on GitHub. It is a 2-layer board of 20.5 × 20.5 mm with 2 parts on 10 nets, routed with 10 tracks and 0 vias.
It is built around the AT24C02C-PUM. It belongs with the lEDs and displays boards of this library.
Github Pages for the BYU-I e-Badge Project
This allows flashing the board directly from a webpage:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | AT24C02C-PUM | easyeda2kicad:DIP-8_L10.0-W6.5-P2.54-LS7.6-BL-A | U1 |
| 1 | MiniBadge_Full | Minibadge:MiniBadge_Full | MB1 |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 20.5 × 20.5 mm and has 2 copper layers, 1.6 mm thick.
2 parts, built around the AT24C02C-PUM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BYU-I-eBadge/byu-i-ebadge.github.io repository on GitHub, at the commit this page was made from: the board is minibadge_examples/I2C/i2c_flash_minibadge.kicad_pcb and its schematic minibadge_examples/I2C/i2c_flash_minibadge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BYU-I-eBadge before reusing the design.