
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

This is a Macropad made for Hackpad. It is meant to be used as a numpad with a volume nob, as my laptop doesn't have a numpad.
Hackpad is an open-source printed circuit board by BANANA8787, from the BANANA8787/llews-Hackpad repository on GitHub. It is a 2-layer board of 100 × 65 mm with 25 parts on 23 nets, routed with 357 tracks and 0 vias.
Its parts include 10 switches, 9 diodes and 1 IC. It belongs with the keyboards and input boards of this library.
My Hackpad submission!
The keys are the Numpad numbers keys with the extra functions like arrow keys. It uses QMK as its firmware. The Hackpad case leaves the left side exposed with the diodes all lined up. It also has a Rotary encoder which is used as a volume knob, and when clicked it mutes the volume. It includes a notch in the case for access to the micro controllers port.
| Top | Bottom |
|---|---|
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 9 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 1 | LOGO | LOGO | G*** |
| 1 | MOUDLE-SEEEDUINO-XIAO | footprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW10 |
The 21 most common of 25 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 100 × 65 mm and has 2 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BANANA8787/llews-Hackpad repository on GitHub, at the commit this page was made from: the board is PCB/hackpad.kicad_pcb and its schematic PCB/hackpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BANANA8787 before reusing the design.