2 layers96.6 × 82.8 mm
2 layers87.5 × 68 mm
Starbie
AyoubChafiq/SlimebieA variation of the Hack Club Starbie, made for Hack Club Half Life. A PCB design including firmware.
- Size
- 87.5 × 68 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 27
- Pads
- 58
- Tracks, vias
- 86, 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Oct 2026
- Updated
- 12 Oct 2026
Overview
Starbie is an open-source printed circuit board by AyoubChafiq, from the AyoubChafiq/Slimebie repository on GitHub. It is a 2-layer board of 87.5 × 68 mm with 16 parts on 27 nets, routed with 86 tracks and 1 via.
It is built around the DHT11. Its parts include 2 resistors, 2 ICs, 2 connectors, 2 switches and 1 diode. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdSlimebie
A variation of the Hack Club Starbie, made for Hack Club Half Life. A PCB design including firmware.
Includes a designed silkscreen on one layer, and has few other differences than the primary Starbie Has 1 extra LED
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G*** |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | Conn_01x04_Pin | Imported Parts:Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | XIAO-ESP32-C3-SMD | Imported Parts:XIAO-ESP32-C3-SMD | U1 |
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5
Questions
How big is the Starbie PCB?
It measures 87.5 × 68 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starbie use?
16 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starbie KiCad files?
From the AyoubChafiq/Slimebie repository on GitHub, at the commit this page was made from: the board is PCB/Starbie.kicad_pcb and its schematic PCB/Starbie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starbie design in my own project?
Its repository states no licence, so its author keeps all rights: ask AyoubChafiq before reusing the design.