Skip to the content
2 layers99.1 × 83.8 mmRC PCB, the printed circuit board in 3D

Printed circuit board for RC control and E-Stop

Size
99.1 × 83.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
51
Pads
146
Tracks, vias
237, 12
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
26 Feb 2023
Updated
29 Oct 2023

Overview

RC PCB is an open-source printed circuit board by Autonomous-Motorsports-Purdue, from the Autonomous-Motorsports-Purdue/RC_PCB repository on GitHub. It is a 2-layer board of 99.1 × 83.8 mm with 29 parts on 51 nets, routed with 237 tracks and 12 vias.

It is built around the RFM9X. Its parts include 7 capacitors, 6 resistors, 6 ICs and 4 switches. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

1

README

README.md

RC_PCB

Printed circuit board for RC control and E-Stop

Should look something like this: link

Parts

29
QtyValueFootprintReferences
70.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4, C5, C6, C7
610kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R4, R5, R6
4MountingHoleMountingHole:MountingHole_3.2mm_M3H3, H3, H3, H3
4SW_PushButton_Switch_THT:SW_PUSH-12mmSW1, SW2, SW3, SW4
2Conn_01x01_MaleConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJT1 VBAT, JT2 VUSB
2JoystickCOM-09032:XDCR_COM-09032U4, U5
1128x64_OLED128x64_OLED:128x64_OLEDU3
1LogoAMP:LogoU2
1RFM9xRF_Module_OTHER:RFM9x_AdafruitU1
1Teensy4.0teensy:Teensy40U2

Similar boards

  • 2 layers36 × 100 mmEleph, the printed circuit board in 3D

    Eleph

    FeruzTopalov/eleph

    GPS-based local relative navigation system for group of up to 6 members

    56 parts24GPL-3.0
  • 2 layers100.1 × 100.1 mmAMP PCBv2, the printed circuit board in 3D

    AMP PCBv2

    Autonomous-Motorsports-Purdue/AMP_PCBv2

    Files relating to version 2 of the PCB for AMP kart

    116 parts1
  • 2 layers27.9 × 33 mmRfm9xw, the printed circuit board in 3D

    Rfm9xw

    kaibader/rfm9x-sx127x-lora-breakout-board

    LoRa Breakout Board for RFM95/RFM96 or SX1276/SX1278 Modules

    9 parts1
  • 2 layers76.2 × 55.3 mmHighAltitudeBalloon, the printed circuit board in 3D

    HighAltitudeBalloon

    OxfordAerospaceAndRocketrySociety/HighAltitudeBalloon

    Please read Setup.md for instructions on installing the dependencies.

    7 parts1
  • 2 layers99 × 93.5 mmEsp32-rfm gateway, the printed circuit board in 3D

    Esp32-rfm gateway

    CalinRadoni/pax-Gateway

    The purpose of this gateway is to either:

    91 partsGPL-3.0
  • 2 layers63.3 × 73 mmNodes, the printed circuit board in 3D

    Nodes

    Simonhajd/Sticktility

    Stick-Tility is a handheld device that powers and reads data from snap-on sensor modules. Once a sensor is connected, it can record data at set time intervals and graph the data on its screen.

    12 parts
  • 2 layers52.3 × 10.5 mmStackLink, the printed circuit board in 3D

    StackLink

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    29 parts5.1kGPL-3.0
  • 2 layers56 × 20 mmHallEffectXY Endstop, the printed circuit board in 3D

    HallEffectXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    29 parts1.1kGPL-3.0

Questions

How big is the RC PCB PCB?

It measures 99.1 × 83.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RC PCB use?

29 parts, built around the RFM9X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RC PCB KiCad files?

From the Autonomous-Motorsports-Purdue/RC_PCB repository on GitHub, at the commit this page was made from: the board is RC_PCB.kicad_pcb and its schematic RC_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RC PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask Autonomous-Motorsports-Purdue before reusing the design.