
Sra dev board 2026
SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications

Designed and developed a custom ESP32 development board PCB from the ground up for embedded systems and IoT applications.
Esp32 wroom is an open-source printed circuit board by AtharvaGupta018, from the AtharvaGupta018/ESP32-dev-board repository on GitHub. It is a 2-layer board of 62.9 × 79 mm with 24 parts on 55 nets, routed with 155 tracks and 0 vias.
It is built around the ESP32-WROOM-32E and AMS1117-3.3. Its parts include 9 connectors, 7 capacitors, 5 resistors and 3 ICs. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J4, J5, J6, J7, J8 |
| 5 | 100nF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C4, C6, C7, C8 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | 5.1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5 |
| 1 | 10nF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 4.7uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | CP2102N-Axx-xQFN20 | Package_DFN_QFN:DHVQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x3mm | U3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | J9 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32E | U1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |

SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications

ricardoquesada/unijoysticle2
Bluetooth gamepad support for the Commodore 64 / Atari / Amiga, etc.

Brobiwann/ESP-spider
The ESP-Spider is a quadruped robot inspired by the miniKame (https://github.com/JavierIH/miniKame) . Like the miniKame, it uses sinusoidal functions to control servo positions, but the design and code were developed…


Alejojoa/Triatlon-Alita
Repositorio dedicado al desarollo de un robot triatlon.
bitsandpixels-io/rgb-butterfly
Butterfly-shaped RGB light panel using ESPHome

herraa1/msx-joyblue-v2
Use bluetooth joysticks with your MSX computer

ZonkSec/kernelcon-2026-badge
source code for kernelcon 2026 off grid badge
It measures 62.9 × 79 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the ESP32-WROOM-32E and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AtharvaGupta018/ESP32-dev-board repository on GitHub, at the commit this page was made from: the board is esp32 wroom.kicad_pcb and its schematic esp32 wroom.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AtharvaGupta018 before reusing the design.