Yet another repo of eurorack DIY
Pike is an open-source printed circuit board by Atarity, from the Atarity/eurorack repository on GitHub. It is a 2-layer board of 87.5 × 27.1 mm with 19 parts on 16 nets, routed with 70 tracks and 13 vias.
It is built around the TSR 0.5-2450 and PJ-005A. Its parts include 4 diodes, 3 resistors, 2 capacitors, 2 connectors and 1 switch. It belongs with the audio and music boards of this library.
Pike — 4HP power for compact racks. It based on turn-key MeanWell PSU with minimum possible additional components. Pike is just a relayout of Excalibus power bus by Befaco made to use with flying bus.
It is possible to install module inside of a rack thru M2-M2.5 screws and not to use front panel at all.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 604-WP424GDT | LED_THT:LED_D3.0mm_IRBlack | D1, D3, D4 |
| 2 | 22uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 2 | 2K2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | +12V | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | +5V | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | -12V | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 1N5400 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D2 |
| 1 | 2MS1T2B3M2QES | 2MS1T2B3M2QES:2MS1-pcb-edge | S1 |
| 1 | DKMW30F-12 | DKMW30F-12:DKMW30F15 | PS1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | IN+ | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | PJ-005A | PJ-005A:PJ005A | J1 |
| 1 | Power bus 02x08 | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J2 |
| 1 | TSR_0.5-2450 | TSR_0.5-2450:TSR-0.5-2433 | PS2 |
Gad9889/Thermistor-Expansion-Module
KiCad project files remain at the repository root. Hierarchical schematic sheets are organized under schematics/, with connector sheets in schematics/connectors/ and gate sheets in schematics/gates/.
NathanGrn/PCB_Parafoil_Serendipity
PCB for an autonomous parafoil guidance system integrated in Serendipity, an experimental rocket developed in-house at CNES by the PERSEUS project. Original project on GitLab:
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
It measures 87.5 × 27.1 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the TSR 0.5-2450 and PJ-005A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Atarity/eurorack repository on GitHub, at the commit this page was made from: the board is Pike/Pike.kicad_pcb and its schematic Pike/Pike.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Atarity before reusing the design.
