Skip to the content
4 layers56.4 × 74 mmAstropix v5 conn, the printed circuit board in 3D

Astropix v5 conn

AstroPix/astropix-pcbs
Size
56.4 × 74 mm
Copper layers
4
Thickness
1.57 mm
Parts
50
Nets
136
Pads
307
Tracks, vias
836, 102
Pours
289
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Feb 2026
Updated
8 Oct 2026

Overview

Astropix v5 conn is an open-source printed circuit board by AstroPix, from the AstroPix/astropix-pcbs repository on GitHub. It is a 4-layer board of 56.4 × 74 mm with 50 parts on 136 nets, routed with 836 tracks and 102 vias.

Its parts include 16 capacitors, 11 connectors, 10 resistors and 1 IC.

Parts

50
QtyValueFootprintReferences
7.1uFCapacitor_SMD:C_0603_1608MetricC2, C9, C10, C12, C16, C17, C18
522Resistor_SMD:R_0402_1005MetricR10, R11, R12, R13, R14
310uFCapacitor_SMD:C_0603_1608MetricC4, C11, C13
31nFCapacitor_SMD:C_0603_1608MetricC1, C6, C8
3HBOutConnector_Coaxial:SMA_Molex_73251-2200_HorizontalJ1, J4, J5
22k2Resistor_SMD:R_0603_1608MetricR2, R3
2FiducialFiducial:Fiducial_1mm_Mask2mmFID3, FID4
2Jumper_2_BridgedConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP4, JP5
2MountingHoleMountingHole:MountingHole_3.2mm_M3H4, H5
2TestPointTestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_BeadedTP1, TP2
1.1uFCapacitor_SMD:C_1210_3225MetricC15
10kResistor_SMD:R_0603_1608MetricR6
1100 nFCapacitor_SMD:C_0603_1608MetricC3
110kResistor_SMD:R_0603_1608MetricR4
11kResistor_SMD:R_0603_1608MetricR1
11nFCapacitor_SMD:C_1210_3225MetricC14
1AstroPix5_split_powerringastropix:AstroPix5_v2U2
1BiasConnector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_HorizontalJ14
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ8
1Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2
1HV_in_externalConnector_Coaxial:SMA_Molex_73251-2200_HorizontalJ7
1HV_logoastropix:hvLogo5
1Jumper_3_Bridged12Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP3
1KIT_logoastropix:logoLogo4
1Measures_AnalogConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ12
1SPI_leftConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ9
1SPI_rightConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ10
1bonderastropix:bonderH6
1pcie_GECCOConnector_PCBEdge:BUS_PCIexpress_x16_iloJ3

Similar boards

  • 4 layers36 × 69 mmABSIS ALE+, the printed circuit board in 3D

    ABSIS ALE+

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    50 parts431
  • 4 layers55 × 35 mmPocketbeagle, the printed circuit board in 3D

    Pocketbeagle

    beagleboard/pocketbeagle

    BeagleBoard.org PocketBeagle - ultra small, ultra flexible, ultra affordable

    50 parts284CC-BY-4.0
  • 4 layers44 × 48 mmYuEEG 8CH RevF POWER, the printed circuit board in 3D

    YuEEG 8CH RevF POWER

    YuTaoV5/YuEEG

    自制ADS1299上位机程序,使用fluent绘制界面

    50 parts181
  • 4 layers51 × 48 mmEsperDNS, the printed circuit board in 3D

    EsperDNS

    zachmorr/esper

    Ad Blocking with an ESP32

    50 parts175MIT
  • 4 layers116.8 × 121.8 mmSe30, the printed circuit board in 3D

    Se30

    rhalkyard/SEthernet

    Modern, low-cost 10/100 Ethernet for the Macintosh SE and SE/30

    50 parts167GPL-3.0
  • 4 layers126.6 × 37.7 mmGruzik2.0, the printed circuit board in 3D

    Gruzik2.0

    NYDEREK/LineFollower_GRUZIK2.0-light

    GRUZIK2.0 is simple light construction made for "line follower light" competition

    50 parts101MIT
  • 4 layers36 × 77 mmUhub, the printed circuit board in 3D

    Uhub

    dotcypress/uhub

    uConsole USB Hub Expansion Card

    50 parts67Apache-2.0
  • 4 layers100 × 100 mm486 Breakout, the printed circuit board in 3D

    486 Breakout

    FoxCutter/486Dev

    Repo for the 486 breadboard computer project

    50 parts44BSD-3-Clause

Questions

How big is the Astropix v5 conn PCB?

It measures 56.4 × 74 mm and has 4 copper layers, 1.57 mm thick.

What parts does the Astropix v5 conn use?

50 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Astropix v5 conn KiCad files?

From the AstroPix/astropix-pcbs repository on GitHub, at the commit this page was made from: the board is AstroPix5/astropix_v5_conn.kicad_pcb and its schematic AstroPix3/astropix_v3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Astropix v5 conn design in my own project?

Its repository states no licence, so its author keeps all rights: ask AstroPix before reusing the design.