Skip to the content
2 layers280.5 × 117 mmArxKey, the printed circuit board in 3D

ZMK Firmware for the split keyboard. (Part 2)

Size
280.5 × 117 mm
Copper layers
2
Thickness
1.6 mm
Parts
121
Nets
95
Pads
664
Tracks, vias
559, 28
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
12 Apr 2026
Updated
5 Jun 2026

Overview

ArxKey is an open-source printed circuit board by ArxDraco007, from the ArxDraco007/ZmkArxKey repository on GitHub. It is a 2-layer board of 280.5 × 117 mm with 121 parts on 95 nets, routed with 559 tracks and 28 vias.

Its parts include 54 diodes, 54 switches and 2 ICs. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

README

README.md

ArxKey - A Custom Split Keyboard

Building a custom wireless split mechanical keyboard from scratch.

Why did I make this project?

There are a lot of ill effects of using a non-ergonomic keyboard. Some basic effects happen, such as ulnar deviation (bending wrists outward), forearm pronation (palms facing down), and unnatural extension. It might also get very serious if you have Carpal Tunnel Syndrome (CTS): The median nerve in the wrist is compressed, often due to swollen tendons. It leads to numbness, tingling, and weakened grip strength. As the times change, you will require a keyboard as it becomes an integral part of your everyday life. It is best to have an ergonomic (furniture or equipment that makes it comfortable and effective for people who use it) keyboard, to make sure you enjoy your work. You can also type very fast. It is also a very fun project to make, and it is also very cool to have your own custom keyboard (split one too).

PICTURES!!!

The easy part -

1775320786451-4x2p1t

The not-so-easy part -

1775912615627-d0wt4m

fusio' - left

Assembly instructions -

  1. Heat-press the brass inserts into the case and glue the magnets into place.
  2. Screw the stabilizers into the PCB and mount the sliding switch to the case.
  3. Solder the diodes, Hall sensors, and header pins to the Seeeduino and PCB.
  4. Connect the battery wires to the BAT pins and the sliding power switch.
  5. Tuck the battery into its cavity and screw the PCB into the case.
  6. Click switches into the plate, screw the plate to the case, and add keycaps.
  7. Flash your ZMK firmware to the Seeeduino.
  8. Repeat for the second half, pair them, and test your work.

How to use it?

  1. Power on both halves, the keyboard will show as ArxSplit in the PC/Phone's Bluetooth settings.
  2. The right and left layers are in the general QWERTY layout.
  3. Plug the USB-C port into your PC or a charger. The XIAO powers on immediately and also charges the LiPo battery connected to the BAT/VBAT pads.
  4. Flashing Firmware - Push the ZMK Files/ directory to a GitHub repo.
  5. It will build two .uf2 files, my_keyboard_left and my_keyboard_right.
  6. Double-tap the Reset button on the XIAO — it enters bootloader mode and mounts as a USB drive called XIAO-SENSE or NRF52BOOT. Drag and drop the .uf2 file onto that drive. It flashes automatically and reboots.

Zine!

zine_page-0001
NamePurposeQuantityTotal Cost (USD)LinkDistributor
Hotswap SocketFittings for the Cherry MX506.00https://stackskb.com/store/gateron-hotswap-sockets/Stackskb
Seeed XIAO nRF52840Must be the nRF52840 version for Bluetooth232.00https://makerbazar.in/products/seeed-studio-xiao-esp32s3-2-4ghz-wifi-ble-5-0MakerBazar
LiPo Battery (3.7V)Battery for powering wireless.26.00https://www.electropi.in/3.7v-300mah-lipo-battery-model-401230-indiaElectropi
Diodes (1N4148W)Diodes for core functionality.1001.50https://robu.in/product/1n4148w-slkor-75v-1v-4ns-150ma-sod-123-switching-diodes-rohsRobu
Cherry MX SwitchesCherry MX switches are the industry standard for mechanical keyboards4518.75https://meckeys.com/shop/accessories/keyboard-accessories/key-switches/cherry-mx-rgb-switch/Meckeys
Resistorsresistors for core functionality12.00https://robu.in/product/1k-ohm-1-4w-0805-surface-mount-chip-resistor-pack-of-10Robu
Custom PCB (JLCPCB)$2 for boards + ~$8 global shipping110.00https://jlcpcb.com/JLCPCB
TOTAL76.25

Parts

121
QtyValueFootprintReferences
54DDiode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +38
54SW_PushPCM_marbastlib-mx:SW_MX_HS_KS-2P02B01-01_1uSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +38
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3MountingHolePanelization.pretty-master:mouse-bite-2mm-slotH5, H6, H7
2BATTestPoint:TestPoint_Pad_D2.0mmTP1, TP2
2GNDTestPoint:TestPoint_Pad_D2.0mmTP3, TP4
2XIAO-nRF52840-SMDCustom-XIAO:modified-XIAO-nRF52840-SMDU1, U2

Similar boards

  • 2 layers241 × 104.5 mmV5 control, the printed circuit board in 3D

    V5 control

    zynthian/zynthian-hw

    Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

    121 parts156
  • 2 layers90 × 100 mmVario, the printed circuit board in 3D

    Vario

    imihajlow/ccpu

    A 8-bit computer made of 74xx series logic gates and memory ICs.

    121 parts145
  • 2 layers281 × 76.2 mmWideZlant, the printed circuit board in 3D

    WideZlant

    Spaceboards/SpaceboardsHardware

    A collection of open source hardware that has been designed by Spaceboards

    121 parts144CERN-OHL-W-2.0
  • 2 layers197 × 71 mmPatch shield digital, the printed circuit board in 3D

    Patch shield digital

    OpenElectronicsLab/OpenHardwareExG

    The OpenHardwareExG is a platform for ECG, EEG, EMG, ENG, EOG, and evoked potential applications. http://openelectronicslab.github.io/OpenHardwareExG/

    121 parts102
  • 2 layersISA FPGA, the printed circuit board in 3D

    ISA FPGA

    robfinch/Cores

    Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.

    121 parts78
  • 2 layers252.2 × 111.8 mmOne42, the printed circuit board in 3D

    One42

    cyril279/keyboards

    121 parts74MIT
  • 2 layers265.1 × 76.2 mmMochi40, the printed circuit board in 3D

    Mochi40

    Aidan-OS/Mochi40

    A 40% keyboard with an OLED and rotary encoder

    121 parts69MIT
  • 2 layers133 × 98 mmPrecharge, the printed circuit board in 3D

    Precharge

    michaelruppe/FSAE

    Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)

    121 parts59MIT

Questions

How big is the ArxKey PCB?

It measures 280.5 × 117 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ArxKey use?

121 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ArxKey KiCad files?

From the ArxDraco007/ZmkArxKey repository on GitHub, at the commit this page was made from: the board is KiCad/ArxKey.kicad_pcb and its schematic KiCad/ArxKey.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ArxKey design in my own project?

Its repository states no licence, so its author keeps all rights: ask ArxDraco007 before reusing the design.