
Sra dev board 2026
SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications

SEWCS Commercial v1 is an open-source printed circuit board by Aru123321, from the Aru123321/KiCad repository on GitHub. It is a 2-layer board of 115 × 80 mm with 50 parts on 36 nets, routed with 375 tracks and 45 vias.
It is built around the CH340C, ESP32-WROOM-32E and ICL7660N, with the OPA380AID and AMS1117-3.3 among its other parts. Its parts include 16 resistors, 15 capacitors, 6 ICs, 6 diodes and 4 transistors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0805_2012Metric | C2, C3, C7, C10, C11, C13, C14, C15 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric | C4, C5, C8, C9, C12 |
| 4 | 100 | Resistor_SMD:R_0805_2012Metric | R5, R6, R7, R8 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R10, R11, R12, R13 |
| 4 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R14, R15 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 150 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 180 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 2.2p | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 200 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | ADS1115_Breakout | Package_SO:MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_PTS645Sx43SMTR92 | SW2 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32E | U3 |
| 1 | FDG05 | Package_TO_SOT_THT:TO-5-2_Window | D5 |
| 1 | ICL7660 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | LED1085L | LED_THT:LED_D5.0mm | D2 |
| 1 | LED1300L | LED_THT:LED_D5.0mm | D3 |
| 1 | LED1600L | LED_THT:LED_D5.0mm | D4 |
| 1 | LED910L | LED_THT:LED_D5.0mm | D1 |
| 1 | OPA380AID | Package_SO:VSSOP-8_3x3mm_P0.65mm | U1 |
| 1 | PWR | LED_SMD:LED_0805_2012Metric | D6 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS645Sx43SMTR92 | SW1 |
| 1 | USB-C | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |

SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications

ricardoquesada/unijoysticle2
Bluetooth gamepad support for the Commodore 64 / Atari / Amiga, etc.


Alejojoa/Triatlon-Alita
Repositorio dedicado al desarollo de un robot triatlon.

herraa1/msx-joyblue-v2
Use bluetooth joysticks with your MSX computer

shazmeenShz/ESP32-Flight-Controller
Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.


sukeshraom/ESP32-WROOM-32E-development-board
ESP32-WROOM-32E development board in the Arduino UNO form factor with USB Type-C and CH340C USB-to-UART interface. Includes complete KiCad schematic, PCB layout, and manufacturing files.
It measures 115 × 80 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the CH340C, ESP32-WROOM-32E, ICL7660N and OPA380AID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Aru123321/KiCad repository on GitHub, at the commit this page was made from: the board is SEWCS_Commercial_v1.kicad_pcb and its schematic SEWCS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Aru123321 before reusing the design.