Skip to the content
2 layers51.1 × 61.3 mmDMG DECN-02, the printed circuit board in 3D

A recreation of the DMG-DECN-02 Game Boy cartridge PCB for board repairs and restorations.

Size
51.1 × 61.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
40
Pads
147
Tracks, vias
916, 140
Pours
19
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
2 Nov 2023
Updated
2 Nov 2023

Overview

DMG DECN-02 is an open-source printed circuit board by ArmenianBot, from the ArmenianBot/DMG-DECN-02 repository on GitHub. It is a 2-layer board of 51.1 × 61.3 mm with 27 parts on 40 nets, routed with 916 tracks and 140 vias.

It belongs with the retro computing and games boards of this library.

README

README.md

DMG-DECN-02

A recreation of the DMG-DECN-02 Game Boy cartridge PCB for board repairs and restorations.

====================================================================

This is intended as a replacement PCB for original Game Boy games that use the DMG-DECN-02 board design.

It may be applicable for games using the DMG-DECN-10 design, as they visually look the same, but this claim is untested at this time. THIS IS NOT INTENDED FOR REPRODUCTION CARTRIDGES. The design is effectively identical to the original and requires you to use original parts from another board.

Design order details:

  • DESIGNS MUST BE ORDERED IN 'ENIG'. DO NOT ORDER IN 'HASL'! (I know. It can be expensive (ಥ﹏ಥ) )
  • Two layers
  • 0.8 mm Thickness
  • Edge Connector = Yes (Also ENIG), 1U

You can either order directly from PCBWay through my link: https://www.pcbway.com/project/shareproject/DMG_DECN_02_Game_Boy_Replacement_PCB_b1a722f7.html OR you can nab the Gerber files above and buy from a different manufacturer.

Games I've seen use this design are:

  • Donkey Kong
  • Donkey Kong World
  • Metroid II
  • Kirby's Dream Land 2
  • Super Mario Land 2

You can check for other games here or similar sites: https://gbhwdb.gekkio.fi/cartridges/

Lastly, the following are links to working capacitors and resistors for the board, if needed:

The rest is up to you. Sorry, I'm no expert :)

Examples below:

Front: Final - Front

Back: Final - Back

An example of a blank board and a board with parts: 20230121_125228

Boards I ordered through JLC PCB: 20230118_181455

Parts

27
QtyValueFootprintReferences
4Cap_ResNintendoFootprints:Cap_ResREF1, REF1, REF1, REF1
4Cap_Res2NintendoFootprints:Cap_Res2REF2, REF2, REF2, REF2
3LOGONintendoFootprints:CapacitorSymbolG***, G***, G***
12KS_26ANintendoFootprints:2KS_26AU4
1CR1616-DMGNintendoFootprints:CR1616-DMGCR1616
1CartBusNintendoFootprints:CartBusU0
1HY6264ALLJ-10NintendoFootprints:HY6264ALLJ-10U3
1LOGONintendoFootprints:Eternity_FrontG***
1LOGOReferencePhotos:Back_ReferenceG***
1LOGOReferencePhotos:Front_Reference2G***
1LOGONintendoFootprints:ResistorLogoG***
1LOGONintendoFootprints:EternityG***
1MBC1BNintendoFootprints:MBC1BU2
1TC532000BFNintendoFootprints:TC532000BFPRG U1

The 22 most common of 27 parts.

Similar boards

  • 2 layers47.6 × 27.3 mmMmc usb 1, the printed circuit board in 3D

    Mmc usb 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    27 parts1.2k
  • 2 layers77.4 × 77.4 mmCORAZON LEDS CON FADE, the printed circuit board in 3D

    CORAZON LEDS CON FADE

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    27 parts915
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers22 × 42 mmNvme bm to e, the printed circuit board in 3D

    Nvme bm to e

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    27 parts253GPL-3.0
  • 2 layers80 × 61 mmPicoProducer, the printed circuit board in 3D

    PicoProducer

    pjgpetecodes/pico-streamdeck

    This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

    27 parts230MIT
  • 2 layers186 × 45 mmAddOnD, the printed circuit board in 3D

    AddOnD

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    27 parts226CC-BY-SA-4.0
  • 2 layers29.6 × 40.6 mmDbwifi revB, the printed circuit board in 3D

    Dbwifi revB

    ugcs/ddc

    Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

    27 parts223

Questions

How big is the DMG DECN-02 PCB?

It measures 51.1 × 61.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DMG DECN-02 use?

27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DMG DECN-02 KiCad files?

From the ArmenianBot/DMG-DECN-02 repository on GitHub, at the commit this page was made from: the board is Project Files/DMG-DECN-02.kicad_pcb and its schematic Project Files/DMG-DECN-02.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DMG DECN-02 design in my own project?

Its repository states no licence, so its author keeps all rights: ask ArmenianBot before reusing the design.