
Config3 v2
Arjun-Anubis/AGV_embedded
A submission for the AGV selection round tasks as can by found here https://drive.google.com/drive/folders/1egEmc1-yBnJ_g8xXa28QhqrrsOWX-JJO by Arjun Ghosh

A submission for the AGV selection round tasks as can by found here https://drive.google.com/drive/folders/1egEmc1-yBnJ_g8xXa28QhqrrsOWX-JJO by Arjun Ghosh
Less pins is an open-source printed circuit board by Arjun-Anubis, from the Arjun-Anubis/AGV_embedded repository on GitHub. It is a 2-layer board of 27 × 20 mm with 14 parts on 18 nets, routed with 90 tracks and 5 vias.
It is built around the NPM1100-QDAA-R7. Its parts include 5 capacitors, 3 connectors, 2 resistors, 2 diodes and 1 IC.
I attempted the first two tasks, the PCB design of the nPM1100 and the digital design of CORDIC in verilog
The task folders each have their directories, within the first level, the README.md will have the info required to run the programs including installation directions etc The documentation and approach will be in the doc folder
Constraints
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C3, C5 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | Battery Header | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | L | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | NPM1100-QDAA-R7 | npm1100lib:QFN50P400X400X90-25N-D | IC1 |
| 1 | Power Header | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | R | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10104110_Horizontal | J1 |

Arjun-Anubis/AGV_embedded
A submission for the AGV selection round tasks as can by found here https://drive.google.com/drive/folders/1egEmc1-yBnJ_g8xXa28QhqrrsOWX-JJO by Arjun Ghosh

Arjun-Anubis/AGV_embedded
A submission for the AGV selection round tasks as can by found here https://drive.google.com/drive/folders/1egEmc1-yBnJ_g8xXa28QhqrrsOWX-JJO by Arjun Ghosh


AeroX2/aerox2.github.io
One repository and npm installation builds the workshop at jamesridey.dev and the professional site at cv.jamesridey.dev.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
It measures 27 × 20 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the NPM1100-QDAA-R7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Arjun-Anubis/AGV_embedded repository on GitHub, at the commit this page was made from: the board is task1/less_pins/less_pins.kicad_pcb and its schematic task1/config3/config3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Arjun-Anubis before reusing the design.