
OSO SWAT C1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

Power smaller size is an open-source printed circuit board by Arbaj-lab, from the Arbaj-lab/Pcb_power_board repository on GitHub. It is a 2-layer board of 80 × 70 mm with 28 parts on 18 nets, routed with 183 tracks and 16 vias.
Its parts include 6 resistors, 4 capacitors, 1 IC, 1 diode and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | Battery_power1, CHARGING_POWER1, output1, Output2, Output3, SWITCH_LED1, SWITCH1 |
| 3 | 2.2k | Resistor_SMD:R_1206_3216Metric | R1, R3, R6 |
| 3 | LOGO | LOGOS.preety:toto | G***, G***, G*** |
| 2 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C2, C3 |
| 2 | 1nF | Capacitor_SMD:C_1206_3216Metric | C1, C4 |
| 2 | 3.3k | Resistor_SMD:R_1206_3216Metric | R2, R4 |
| 2 | ACS712xLCTR-20A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | B_Charging_Current1, Load_Current1 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 10k Ohm | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | PULLBACK1 |
| 1 | Conn_01x05_Socket | Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J1 |
| 1 | D | Diode_THT:D_DO-27_P15.24mm_Horizontal | D1 |
| 1 | Fuse_Small | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | RELAY | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | ~ | MY_Custom_library:Lm2596 | U1 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
It measures 80 × 70 mm and has 2 copper layers, 1.6 mm thick.
28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Arbaj-lab/Pcb_power_board repository on GitHub, at the commit this page was made from: the board is power_smaller_size/power_smaller_size.kicad_pcb and its schematic power_smaller_size/power_smaller_size.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Arbaj-lab before reusing the design.