
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Repositorio con los recursos desarrollados durante la presentación del workshop "Kicad y FreeCAD - Un círculo virtuoso" en el marco de la FLISOL - CABA 2026
Porta figus is an open-source printed circuit board by ApophisXIV, from the ApophisXIV/Flisol-2026 repository on GitHub, published under the MIT licence. It is a 2-layer board of 48.1 × 50 mm with 14 parts on 9 nets, routed with 15 tracks and 0 vias.
Its parts include 6 resistors, 6 diodes, 1 connector and 1 switch.
Este repositorio contiene los archivos de diseño, esquemáticos y modelos 3D utilizados en el taller práctico que dicté para FLISOL CABA 2026 (UTN F.R.B.A.). El proyecto consiste en el codiseño de un dispositivo desde cero (un porta figuritas iluminado), demostrando un flujo de trabajo profesional e integrado entre el diseño electrónico (ECAD con KiCad) y el mecánico (MCAD con FreeCAD) mediante el workbench StepUp como nexo dinámico y bidireccional.
Video de la presentación en vivo: https://youtu.be/WnovX8TwaMI
¡Video Explicativo Detallado! Subí un video a mi canal de YouTube donde explico todo el proceso paso a paso con lujo de detalles. Podés verlo haciendo clic en el siguiente enlace: https://youtu.be/E-u6ZGPfnZk.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 560 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 3 | Azul 3mm | LED_THT:LED_D3.0mm | D1, D3, D5 |
| 3 | Blanco 3mm | LED_THT:LED_D3.0mm | D2, D4, D6 |
| 1 | Bateria 9V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Final de carrera | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 48.1 × 50 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ApophisXIV/Flisol-2026 repository on GitHub, at the commit this page was made from: the board is Porta_figus/Porta_figus.kicad_pcb and its schematic Porta_figus/Porta_figus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).