Skip to the content
2 layers76.9 × 99.3 mmHackpad for stardance, the printed circuit board in 3D

A sleek hackpad made for the Hack Club Stardance YSWS.

Size
76.9 × 99.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
26
Pads
123
Tracks, vias
196, 4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Aug 2026
Updated
13 Aug 2026

Overview

Hackpad for stardance is an open-source printed circuit board by Anycircle11139s, from the Anycircle11139s/Stardance-Hackpad repository on GitHub, published under the MIT licence. It is a 2-layer board of 76.9 × 99.3 mm with 27 parts on 26 nets, routed with 196 tracks and 4 vias.

Its parts include 13 switches, 12 diodes, 1 IC and 1 connector.

README

README.md

Hack Club Stardance Hackpad

A sleek hackpad made for the Hack Club Stardance YSWS.

By: Darsh Shah (@Anycircle11139s) or @NotALarp on slack

Case render


Screenshot 2026-08-09 at 10 50 00 am Screenshot 2026-08-09 at 10 50 07 am Screenshot 2026-08-09 at 10 49 54 am

Overview

I created a custom macropad with 12 keys, an OLED screen, and a rotary encoder. I built it because I wanted to get into Stardance and see how it works, and a hackpad is the perfect way to do that. I designed a custom, sleek case to fit around the PCB, and learned about different types of fillets, like tangent (G1) and curvature (G2). Building this taught me a lot about product design.

Features

  • OLED display
  • 12 Cherry MX switches
  • Rotary encoder
  • Xiao RP2040 microcontroller
  • Custom 3D printable case

Build Steps

  1. Order all the parts and 3D print the case.
  2. Solder all the parts onto the PCB.
  3. Place the PCB inside the case and screw on the lid.
  4. Flash the firmware and enjoy!

Firmware

  • Framework: KMK (CircuitPython)
  • Notes: Simple to flash. The OLED display shows "Hackpad", each key acts as a number key (1-12), and the rotary encoder controls volume.

Firmware files and pin mapping are in the firmware/ folder.

Hardware

KiCad schematic, PCB layout, and Gerbers are in the hardware/ folder. 3D-printable case files are in the enclosure/ folder. Renders and schematic/PCB screenshots are in images/.

Bill of Materials

A CSV version is also available at BOM.csv.

PartQtyCost EachNotes
0.91" OLED Display1$0.00From Stardance hackpad kit
1N4148 diodes12$0.00From Stardance hackpad kit
Cherry MX switches12$0.00From Stardance hackpad kit
Rotary encoder1$0.00From Stardance hackpad kit
Keycaps12$0.00From Stardance hackpad kit
Xiao RP2040 microcontroller1$0.00From Stardance hackpad kit
3D Printed Enclosure1$0.00Printed by Printing Legion
M3 Screws4$0.00From Stardance hackpad kit
PCB1$5.50From JLCPCB

Total estimated cost: $5.50

License

This project is licensed under the MIT License — see LICENSE for details.

Parts

27
QtyValueFootprintReferences
121N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12
12SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13
1Conn_01x04_SocketOled:SSD1306-0.91-OLED-4pin-128x32J1
1MOUDLE-SEEEDUINO-XIAOXiao rp2040 (Dip):XIAO RP2040 DIPU1
1RotaryEncoderRotary Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW2

Similar boards

  • 2 layers47.6 × 27.3 mmMmc usb 1, the printed circuit board in 3D

    Mmc usb 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    27 parts1.2k
  • 2 layers77.4 × 77.4 mmCORAZON LEDS CON FADE, the printed circuit board in 3D

    CORAZON LEDS CON FADE

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    27 parts915
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers22 × 42 mmNvme bm to e, the printed circuit board in 3D

    Nvme bm to e

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    27 parts253GPL-3.0
  • 2 layers80 × 61 mmPicoProducer, the printed circuit board in 3D

    PicoProducer

    pjgpetecodes/pico-streamdeck

    This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

    27 parts230MIT
  • 2 layers186 × 45 mmAddOnD, the printed circuit board in 3D

    AddOnD

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    27 parts226CC-BY-SA-4.0
  • 2 layers29.6 × 40.6 mmDbwifi revB, the printed circuit board in 3D

    Dbwifi revB

    ugcs/ddc

    Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

    27 parts223

Questions

How big is the Hackpad for stardance PCB?

It measures 76.9 × 99.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Hackpad for stardance use?

27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hackpad for stardance KiCad files?

From the Anycircle11139s/Stardance-Hackpad repository on GitHub, at the commit this page was made from: the board is hardware/Hackpad_for_stardance.kicad_pcb and its schematic hardware/Hackpad_for_stardance.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hackpad for stardance design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).