
PowerBook
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

This is a choc only wireless split keyboard with pro micro compatible sockets. It's inspired by the Sofle, Lily58, Corne, ... keyboards. It has Kailh choc spacings (18 mm x 17 mm).
Anthony untitled keyboard is an open-source printed circuit board by AnthonyAmanse, from the AnthonyAmanse/untitled-keyboard repository on GitHub. It is a 2-layer board of 137.1 × 118.9 mm with 83 parts on 57 nets, routed with 1,029 tracks and 134 vias.
Its parts include 29 diodes, 29 switches, 5 connectors, 2 resistors and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
This is a choc only wireless split keyboard with pro micro compatible sockets. It's inspired by the Sofle, Lily58, Corne, ... keyboards. It has Kailh choc spacings (18 mm x 17 mm). Keycaps I'm using are MBK choc keycaps which has a size of 17.5 x 16.5. I didn't add support for encoder to make it a bit lighter. Pinky columns has a 0.5u vertical offset to make it more comfortable (at least for me). Bottom row has 2 x 1.5u keys with an angle. I thought this would make the thumb cluster more comfortable and reachable. In my experience with this keyboard, the thumb keys are more comfortable when the keyboard is tented. OLED is supported as well - make sure you have a big battery as it consumes a lot of power. I'm using 2000 mAh. This should last me 3-4 weeks based on ZMK's power profiler.
The pro micro socket has a bit more width spacing to support the bluemicro840's 20mm width. I've only tested this keyboard with ZMK firmware but it should work for QMK as well since I've put in a slot for the TRRS jacks. Keyboard doesn't have a name so feel free to remove or change the silkscreen on the PCB!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | DIODE | sofle:Diode_SOD123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +13 |
| 29 | SW_PUSH | keyswitches:Kailh_socket_PG1350_reversible | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +13 |
| 8 | Device_Jumper_NO_Small | sofle:Jumper | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 5 | HOLE | sofle:HOLE_M2_TH | TH3, TH4, TH5, TH6, TH7 |
| 2 | HOLE | sofle:M2_HOLE_PCB | TH1, TH2 |
| 2 | R | sofle:RESISTOR_mini | R1, R2 |
| 2 | i2c_pin | sofle:1pin_conn | P1, P2 |
| 1 | 4PIN | sofle:MJ-4PP-9 | J2 |
| 1 | LED | sofle:LED | J1 |
| 1 | OLED | sofle:OLED_4Pin | J3 |
| 1 | ProMicro | sofle:ProMicro | U1 |
| 1 | SW_RST | sofle:TACT_SWITCH_TVBP06 | RSW1 |
| 1 | jumper | sofle:jumper_data | W1 |

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350


GaudiLabs/OpenLaserScanningMicroscope
Open Source Laser Scanning Microscope



plinkysynth/plinky_public
a public release of the plinky sw and hw

freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

zoemaestra/hair-electrolysis-machine-usb-c
A fork of scd31's hair electrolysis machine but with USB-C and optimised for cheaper assembly with JLCPCB
It measures 137.1 × 118.9 mm and has 2 copper layers, 1.6 mm thick.
83 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AnthonyAmanse/untitled-keyboard repository on GitHub, at the commit this page was made from: the board is kicad/anthony-untitled-keyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AnthonyAmanse before reusing the design.